Wagner makes three distinct tool lines that matter to contractors: precision heat guns, high-efficiency paint sprayers, and surface preparation equipment. The Furno 700 heat gun delivers 117 temperature settings from 125°F to 1300°F — that’s professional-grade control. The Control Pro paint sprayers cut overspray by 55% compared to conventional airless systems. The PaintEater uses spun-fiber disc technology that removes paint without damaging the substrate.
Professional Heat Control That Actually Works
The Furno 700 packs 1500 watts and 5100 BTUs into a tool with 117 variable temperature settings in 10°F increments. That level of precision matters when you’re bending PVC pipe at 275°F versus stripping paint at 1000°F. The LCD display shows exact temperature and fan speed — no guessing whether you’re at the right heat for softening caulk versus thawing pipes.
Five fan speeds plus a dedicated cool-down mode give you control over heat concentration. Low fan speed concentrates heat for detail work. High speed disperses it for broader coverage. The cool-down mode protects the heating element and prevents accidental burns when setting the tool down.
Ratings tell the real story: 4.5 stars on Amazon (11,158 reviews), 4.7 at Lowe’s, 4.9 at Walmart. Contractors don’t hand out 5-star ratings for tools that fail on the job.
| Specification | Furno 700 |
|---|---|
| Power | 1500W / 5100 BTUs |
| Temperature Range | 125°F to 1300°F |
| Temperature Settings | 117 (10°F increments) |
| Fan Speeds | 5 plus cool-down |
| Display | Graphic LCD |
| Voltage | 120V |
| Current Draw | 12.5 Amps |
The Furno 700 is the advanced digital model compared to the Furno 500 (lower temp range and fewer settings) and the Furno 300 (dual-temp toggle version). For Montana winters, that precision matters. Thawing a 2-inch copper pipe needs different heat than removing 50-year-old varnish.
Paint Sprayers Built for Real Coverage
Wagner’s Control Pro line addresses the biggest complaint about airless sprayers: overspray waste. High Efficiency Airless (HEA) technology reduces overspray by up to 55%. That’s not marketing fluff — it’s measurable paint savings on every job.
The Control Pro 130 holds 1.5 gallons in its gravity-fed hopper. It covers approximately 500 sqft in about 20 minutes. Do the math: that’s an 8x10 wall in 2 minutes. The 25-foot hose reaches second-story work without moving the unit.
The gravity-fed design solves two problems. Fast priming and easy cleaning because paint flows down naturally. No suction tube to clean. No priming valve to fail. Compatible with unthinned paints and stains — pour it straight from the can.
The Control Pro 130 won the 2019 Pro Tool Innovation Award. Tool innovation awards mean something when contractors vote with their wallets. The Control Pro 150 steps up with a 0.55 HP HEA pump and 1500 PSI maximum pressure, pulling paint directly from 1 or 5-gallon buckets.
| Model | Key Features |
|---|---|
| Control Pro 130 | 1.5-gallon gravity hopper, 25-foot hose, 2019 Pro Tool Innovation Award |
| Control Pro 150 | 0.55 HP pump, 1500 PSI max, pulls from 1 or 5-gallon buckets |
| Control Spray Double Duty | Designed for stains, covers 8’x8’ in under 2 minutes |
The learning curve is real. Customer reviews mention challenges with overspray control, nozzle clogs, and achieving light coats. The sprayer uses more paint than rollers. But for production work — siding, fences, large interiors — the speed advantage pays.
Surface Prep That Doesn’t Destroy Substrates
The PaintEater uses a special fiber disk with embedded abrasive that removes paint chips without clogging. Designed to remove peeling paint without damaging the substrate. That’s the key — aggressive enough to strip failed coatings, gentle enough to preserve the wood underneath.
The orbital action runs at 3.2 amps with professional-grade power. The spun-fiber design means the disc flexes to follow surface contours. Paint dust doesn’t pack into sandpaper grit because the open-web fibers shed debris continuously.
Montana Context: Why These Tools Matter Here
Heat guns earn their keep in Montana winters. Frozen pipes, ice dams, frozen locks — the Furno 700’s temperature precision handles them all. That 125°F low setting safely thaws PVC drain lines. The 1300°F high setting strips decades of paint from log homes.
Paint sprayers make sense on Montana’s large properties. Ranch fencing, barn siding, deck staining — projects where coverage speed trumps perfection. The Control Pro’s reduced overspray matters when painting near vehicles or landscaping.
Surface prep tools face Montana’s weather-beaten exteriors daily. Twenty years of freeze-thaw cycles leave paint peeling. The PaintEater removes failed coatings without gouging the wood that’s survived since 1950.
Wagner doesn’t make homeowner toys. These tools target contractors who bill by the job, not the hour. The heat gun precision, sprayer efficiency, and surface prep capability translate directly to completed projects and repeat customers.
Frequently Asked Questions
Q: What temperature range does the Wagner Furno 700 heat gun offer?
The Wagner Furno 700 delivers 125°F to 1300°F with 117 variable temperature settings in 10°F increments. This 1500-watt heat gun provides precise control for everything from thawing frozen pipes at low temperatures to stripping paint at maximum heat.
Q: How much does the Wagner Control Pro paint sprayer reduce overspray?
Wagner’s Control Pro paint sprayers reduce overspray by up to 55% compared to conventional airless sprayers through their High Efficiency Airless (HEA) technology. This measurable reduction means less paint waste and cleaner job sites when spraying fences, siding, or interior walls.
Q: What’s the coverage speed of Wagner paint sprayers?
The Wagner Control Pro 130 covers approximately 500 square feet in about 20 minutes, while the Control Spray Double Duty covers an 8’x8’ area in under 2 minutes for staining projects. The Control Pro 130 holds 1.5 gallons in its gravity-fed hopper and includes a 25-foot hose for reaching second-story work.
Q: Can Wagner paint sprayers handle unthinned paint?
Yes, Wagner Control Pro sprayers are compatible with unthinned paints and stains straight from the can. The gravity-fed design on the Control Pro 130 and the 0.55 HP pump on the Control Pro 150 handle latex paints, stains, and primers without thinning.
Q: What makes the Wagner PaintEater different from regular sanders?
The Wagner PaintEater uses a special spun-fiber disk with embedded abrasive that removes paint without damaging the wood substrate underneath. Running at 3.2 amps, this orbital sander’s flexible disc follows surface contours and continuously sheds paint debris instead of clogging like traditional sandpaper.
Q: What warranty does Wagner offer on their heat guns?
Wagner provides a 2-year limited warranty on the Furno 700 heat gun. The tool comes with accessory nozzles for specialized applications and features a built-in stand for hands-free operation during cooling.
Ready to Get Started?
Our tools specialists can help you find the right Wagner products for your project.
More from Wagner
Explore All Wagner Products
We carry Wagner across all 11 Montana and Idaho stores.
