Worth it for contractors who need to organize batteries in vans, shops, or on jobsites. The 30-pound capacity per mount handles any DeWalt battery, the click-lock mechanism actually keeps batteries secure during transport, and the kit works with the entire DeWalt voltage range from 18V to 60V. At 4.8 stars across 750+ users, it delivers what StealthMounts promises.
This kit shines in mobile work setups, tight workshop spaces, and anywhere dropped batteries cost money.
Load Capacity and Build Quality
The 30-pound load capacity per mount matters when you’re hanging 60V FlexVolt batteries that weigh 3-4 pounds fully loaded. High-impact, UV-resistant injection-molded ABS plastic construction means these mounts won’t crack when your van hits Montana potholes or fade under high-altitude sun exposure. Chemical and impact resistance handles shop environments where solvents splash and tools bump.
| Specification | Value |
|---|---|
| Load Capacity | 30 lbs (13.6 kg) per mount |
| Material | High-impact, UV-resistant injection-molded ABS plastic |
| Mount Dimensions | 2.95 x 2.28 x 0.75 inches |
| Single Mount Weight | 3.17 oz (90g) |
| Color | Yellow (DeWalt color-matched) |
UK manufacturing shows in the details. ISO 9001 certification for quality management, ISO 14001 for environmental management, and ISO 45001 for health and safety — certifications that matter when you’re trusting these mounts to hold expensive batteries overhead in your van.
Universal Mounting Flexibility
360-degree mounting flexibility changes how you organize batteries. Mount them horizontal on pegboard, vertical inside cabinets, or upside down under shelves. The belt loop feature turns any mount into a mobile carrier — loop it through your belt when you need batteries accessible but hands free on a ladder or scaffold.
Two pre-drilled countersunk holes accept screws for any surface — wood studs, metal van walls, or plastic tool cases. Just screw the mount to your surface. No special hardware, no complicated brackets. Montana contractors mention this versatility specifically when organizing work vans — mount batteries on van walls during transport, then grab the whole mount and clip it to your belt at the jobsite.
DeWalt Ecosystem Compatibility
These mounts handle everything in the DeWalt battery universe: 18V, 20V, 54V, and 60V platforms. Specific model support includes DCB200 through DCB609 — basically every XR and FlexVolt battery DeWalt makes. The yellow color matches DeWalt equipment, maintaining that brand consistency contractors care about when clients see their setup.
The mount design accommodates DeWalt’s 18V XR, 20V Max XR, 54V FlexVolt, and 20V/60V FlexVolt Max batteries without requiring different mount sizes. One mount type, full platform coverage. That matters when you’re running mixed voltage tools on the same job.
The Click-Lock Difference
The click-in locking mechanism uses the battery’s own release button to create a positive lock. Slide the battery into the mount until it clicks. To remove, press the battery release button and pull. Simple, but it solves the universal contractor complaint about batteries falling out of generic holders during transport.
Multiple sources confirm these mounts prevent accidental falls even during transport, with batteries staying secure when mounted at any angle. User reviews specifically praise how batteries “click in securely” — not marketing speak, but actual field experience from 750+ users.
The Bottom Line
StealthMounts delivers a mount that actually works. Injection-molded ABS construction outlasts 3D-printed alternatives. 30-pound capacity handles any DeWalt battery with room to spare. The click-lock mechanism keeps batteries where you put them.
For Montana contractors driving between jobsites on rough roads, the secure mounting and 360-degree flexibility solve real problems. Mount them in your van for transport, grab them for your belt on site, or organize your shop wall — same mounts, multiple uses. At 4.8 stars from 750+ users, field performance backs up the specs.
The only consistent complaint: mounting screws aren’t included. Minor annoyance for a mount system that otherwise nails the fundamentals.
Frequently Asked Questions
Q: Do these mounts work with all DeWalt batteries? A: Yes, they’re compatible with 18V, 20V, 54V, and 60V DeWalt batteries, including specific models DCB200 through DCB609. This covers DeWalt’s 18V XR, 20V Max XR, 54V FlexVolt, and 20V/60V FlexVolt Max platforms.
Q: How much weight can each mount support? A: Each mount supports up to 30 pounds (13.6 kg), far exceeding the weight of any DeWalt battery.
Q: Can these be mounted upside down or sideways? A: Yes, the mounts offer 360-degree mounting flexibility and can be installed at any angle — horizontal, vertical, or upside down. The click-lock mechanism keeps batteries secure regardless of mounting orientation.
Q: What mounting hardware is needed? A: The mounts have two pre-drilled countersunk holes but screws are not included. You’ll need screws appropriate for your mounting surface — wood, metal, or plastic.
Q: Are these made from cheap 3D-printed plastic? A: No, these are high-impact, UV-resistant injection-molded ABS plastic manufactured in the UK with ISO 9001 quality certification. They’re specifically noted as premium build quality compared to cheaper 3D-printed alternatives.
Q: Can these mounts be carried on a tool belt? A: Yes, they feature a belt loop design that allows you to loop them through a belt for mobile jobsite use. This feature is highlighted for on-site convenience by contractors.
Ready to Get Started?
Our tools specialists can help you find the right StealthMounts products for your project.
More from StealthMounts
Explore All StealthMounts Products
We carry StealthMounts across all 11 Montana and Idaho stores.
