StealthMounts Cleat n’ Feet mounting cleats bring Milwaukee Packout compatibility to any surface through injection-molded ABS plastic cleats tested to over 100 lbs (52 kg) per pair. These British-made cleats deliver the same secure hold contractors need for service vehicles and shop walls while providing a more affordable alternative to Milwaukee’s mounting hardware.
Each cleat measures approximately 4.13 x 3.94 x 1.48-2.17 inches and weighs just 0.21 lbs (95g). The countersunk screw holes allow flush mounting, and the friction-fit design makes sliding Packout boxes on and off simple. Compatible with the full Milwaukee Packout System, StealthMounts Mounting Feet, and Milwaukee Locking Wall Control System.
Load Capacity and Construction Quality
The 100+ lb per pair rating handles real jobsite loads. That’s enough for a fully loaded Packout organizer with hardware, a rolling toolbox base unit, or multiple small parts organizers. The high-grade injection-molded ABS plastic construction delivers impact resistance that matters when tools get tossed around in service trucks bouncing down Montana backroads.
Made in England, these cleats resist abrasion and cracking — critical when temperatures swing from summer heat to winter cold. The ABS material won’t brittle up at -20°F like cheaper plastics. Reviews rate them 4.4 out of 5 stars overall, with contractors praising the sturdy construction for standard toolbox weights.
| Specification | Value |
|---|---|
| Load Capacity | 100+ lbs (52 kg) per pair |
| Material | High-grade injection-molded ABS plastic |
| Dimensions per Cleat | 4.13 x 3.94 x 1.48-2.17 inches |
| Weight (6-pack) | 0.21 lbs (95g) |
| Manufacturing Origin | United Kingdom |
| Overall Rating | 4.4/5 stars |
Installation Flexibility for Job Site Reality
The countersunk screw holes mean these cleats mount flush against any surface — plywood van walls, OSB trailer interiors, shop pegboard, or garage studs. StealthMounts designed them for walls, under shelves, in vehicles, and on trolleys. That versatility matters when organizing a work truck that doubles as mobile storage and transport.
Installation follows standard mounting: plan your layout, mark screw holes through the cleats, drill pilot holes if needed, then secure with appropriate screws or bolts. Reviews note no mounting template comes included — grab a piece of cardboard to make your own spacing jig if mounting multiple cleats.
The friction-fit design holds Packout boxes secure during transport but releases easily when you need to grab gear. No latches to fumble with in cold weather. The space-saving modular design allows custom storage layouts — critical when every square inch of van wall space counts.
Milwaukee Packout System Value
Full Milwaukee Packout System compatibility makes these cleats work with the tool storage system most Montana contractors already own. StealthMounts delivers Milwaukee-compatible mounting as an affordable alternative. They also work with StealthMounts Mounting Feet for expanded options like creating custom brackets or adapting non-Packout items to the system.
The cleats support up to 52kg (approximately 115 lbs), compatible with Milwaukee Packout system, facilitating organized and stable mounting of tools and storage units suitable for various surfaces. For contractors running multiple Packout boxes between job sites, these cleats turn dead wall space into organized storage without breaking the tool budget.
Warranty coverage varies by retailer — Acme Tools offers lifetime warranty against manufacturer defects while Northern Tool provides 1-year limited coverage. StealthMounts holds ISO 9001, ISO 14001, and ISO 45001 certifications plus Made in Britain certification — actual quality standards backing up the construction claims.
FAQ
How much weight can StealthMounts cleats really hold? Tested to over 100 lbs (52 kg) per pair of cleats. That’s sufficient for fully loaded Packout organizers or rolling bases. Mount heavier items using multiple cleat pairs to distribute the load.
Do these work with all Milwaukee Packout boxes? Yes — full Milwaukee Packout System compatibility means they work with all current Packout toolboxes, organizers, and accessories. The friction-fit design accepts the standard Packout mounting interface.
What’s the actual quality like compared to Milwaukee’s mounting hardware? High-grade injection-molded ABS plastic construction made in Great Britain. 4.4 out of 5 stars in reviews with contractors praising sturdy construction for standard toolbox weights. Some reports of breakage under high stress and occasional fitment tolerance issues, but overall reliability matches expectations for third-party accessories.
What mounting hardware comes included? The pack includes six black mounting cleats. No mounting template included — you’ll need to supply your own screws appropriate for your mounting surface (wood screws for studs, sheet metal screws for van walls, etc.).
Ready to Get Started?
Our tools specialists can help you find the right StealthMounts products for your project.
More from StealthMounts
Explore All StealthMounts Products
We carry StealthMounts across all 11 Montana and Idaho stores.
