Worth it for contractors who need portable precision without breaking the bank on a cabinet saw. The TS6307-00 delivers rack and pinion fence accuracy, 25.5-inch rip capacity for sheet goods, and a folding stand that actually works.
Skip it if you’re cutting thick hardwoods all day or need dado capability beyond 5/8 inch. This is a jobsite saw, not a shop centerpiece.
The Rack and Pinion Fence Changes Everything
Traditional jobsite saws use aluminum rail fences that go out of square every time you bump the table. Skil’s rack and pinion system stays parallel to the blade through transport and setup. The micro-adjustment capability means you can dial in cuts to the thickness of a business card — not something you’d expect from an entry-level saw.
Some users report blade micro-movement affecting cut precision. Fair criticism. No jobsite saw matches a shop cabinet saw for rigidity. But for framing and finish work where you’re cutting to the nearest sixteenth, not thousandth, the fence system delivers.
The real test? Ripping through hardwoods. Multiple sources confirm the 15-amp motor handles oak and maple without bogging down. At 4,600 RPM no-load speed, it’s spinning fast enough to make clean cuts in dense lumber.
| Specification | Value |
|---|---|
| Motor | 15-Amp |
| Voltage | 120V AC |
| Blade Diameter | 10 inches (254 mm) |
| Arbor Size | 5/8 inch (15.88 mm) |
| No-Load Speed | 4,600 RPM |
| Rip Capacity Right | 25-1/2 inches (64.77 cm) |
| Rip Capacity Left | 14 inches |
| Max Cut Depth @ 90° | 3.5 inches |
| Bevel Range | -2° to 47° |
| Weight | 51 lbs |
Sheet Goods Without the Second Pass
The 25.5-inch rip capacity handles standard 4x8 sheets cut down the middle in one pass. That’s table saw 101, but plenty of budget saws force you to flip the sheet and make a second cut. The saw cuts 4x4 lumber at 90 degrees — critical for post work and timber framing.
Two miter slots let you run crosscut sleds or aftermarket miter gauges. Compatible with dado stacks up to 5/8 inch, though that’s the thin end for cabinet work. You’re not cutting raised panels with this setup.
The integrated folding legs eliminate the wobbly separate stand problem. Legs lock into the saw body for transport, then deploy in seconds at the jobsite. No missing bolts, no bent tubes from throwing the stand in the truck bed. Folded dimensions come in around 17” high, 27” wide, and 29” long.
The Montana Contractor’s Verdict
For a jobsite saw, something’s gotta give. No soft start means the motor kicks hard at startup. Table flatness varies about 1/32 inch — not a problem for framing but noticeable on fine joinery. Dust collection works but won’t match a dedicated shop system.
Here’s what matters: Professional contractors rank it comparable to Bosch, DeWalt, and Makita jobsite saws. The 15-amp motor, 25.5-inch capacity, and rack and pinion fence combine to make this a legitimate professional tool.
For Montana contractors bouncing between jobsites from Kalispell to Libby, the folding stand design means one less thing rattling around the truck bed. The fence stays true after a morning of frost heave and an afternoon of chinook winds. And when you’re framing in February, the saw fires up without complaint at 15 below.
Common Questions
Can this saw handle pressure-treated lumber? Yes. The 15-amp motor at 4,600 RPM cuts through hardwoods, plywood, and framing lumber with ease. Wet pressure-treated 2x12s are no problem.
How accurate is the fence after transport? The rack and pinion design maintains fence parallelism better than standard aluminum rail systems. Users report the fence stays parallel to the blade even after jobsite moves.
What’s actually included in the box? 10-inch carbide-tipped blade (24-tooth), integrated folding stand, rack and pinion fence assembly, dust port elbow, miter gauge. Some bundles include a dado insert plate.
Is the 51-pound weight manageable? Lighter than most contractor saws with separate stands. The integrated legs mean you’re lifting one unit, not juggling saw and stand separately. One person can load it in a truck.
How does it compare to the worm drive Skilsaw models? Different animal entirely. The worm drive saws (like the SPT99-11) are heavy-duty beasts with 30.5-inch rip capacity and rolling stands. The TS6307-00 targets portable precision, not maximum power.
Frequently Asked Questions
Q: What’s the actual rip capacity on the Skil TS6307-00?
The Skil TS6307-00 offers 25.5 inches of rip capacity to the right of the blade and 14 inches to the left. This means you can rip a standard 4x8 sheet of plywood down the middle in a single pass without having to flip and recut.
Q: Does the Skil table saw come with a stand or do I need to buy one separately?
The TS6307-00 includes integrated folding legs that form a portable stand — no separate purchase needed. The legs lock into the saw body for transport and deploy quickly at the jobsite, eliminating the hassle of a separate wobbly stand.
Q: What size dado blade can I use with this Skil saw?
The Skil TS6307-00 accepts dado stacks up to 5/8 inch, with dado insert plates available in some bundles. This limitation means it’s suitable for basic dado work but not heavy cabinet joinery requiring wider dado sets.
Q: How powerful is the motor on the Skil TS6307-00?
The saw features a 15-amp motor running at 4,600 RPM no-load speed. Professional contractors report it handles hardwoods like oak and maple without bogging down, and it cuts 4x4 lumber at 90 degrees.
Q: What’s the difference between this saw and Skil’s worm drive table saws?
The TS6307-00 is a portable jobsite saw weighing 51 pounds with 25.5-inch rip capacity, while Skil’s worm drive models like the SPT99-11 are heavy-duty saws with 30.5-inch rip capacity and rolling stands. The worm drive models target different use cases — maximum power versus portable precision.
Q: Is the fence system on the Skil accurate enough for finish work?
The Skil TS6307-00 uses a rack and pinion fence system with micro-adjustment capability, allowing precise parallel adjustments to the blade. While some users note minor blade micro-movement that can affect ultra-precise cuts, the fence maintains accuracy well enough for framing and standard finish work.
Ready to Get Started?
Our tools specialists can help you find the right Skil products for your project.
More from Skil
Explore All Skil Products
We carry Skil across all 11 Montana and Idaho stores.
