Sievert PowerJet Standard Interchangeable Torch Burner Tip

The PowerJet Standard burner tip transforms any compatible Sievert torch handle into a versatile heating tool through its Twist ‘N Lock bayonet system. At 16mm diameter with 1.2 kW heat output at 2 bar pressure, this brass and polymer tip handles everything from soft soldering small-diameter pipes to de-icing frozen locks — critical capabilities when Montana winters freeze everything solid.

The real advantage? Tool-free burner changes without requiring any tools. Contractors working multiple trades can swap from plumbing to electrical to general heating tasks in seconds. The 360° stable flame works in all positions, whether you’re underneath a crawlspace thawing pipes or overhead loosening rusted hangers.

Quick-Change System and Multi-Fuel Flexibility

Align the bayonet tabs with the slots on the PowerJet or MetalJet handle, press in, turn 90 degrees clockwise — locked. That’s the entire installation process. To remove, allow to cool, then press and turn counter-clockwise. No wrenches, no threads to cross, no time wasted.

The tip accepts Propane, Butane, MAPP, Ultramapp, and Ultragas — whatever’s already on the truck works. Rural Montana contractors appreciate this flexibility when the nearest supplier might be an hour away. At 90 g/h gas consumption at 2 bar, a standard cylinder lasts through multiple service calls.

The quick-cooling burner head feature matters when you’re tossing tools back in the truck between stops. Montana’s temperature swings — from sub-zero mornings to afternoon chinooks — make safe tool storage critical.

Performance Specifications and Applications

Specification	Value
Burner Diameter	16 mm
Heat Output	1.2 kW (at 2 bar)
Gas Consumption	90 g/h (at 2 bar)
Working Pressure	2 bar
Flame Stability	360° all positions
Soft Solder Capacity	Pipes up to 18mm diameter

The Standard burner tip is designed for soft soldering and brazing on small-diameter pipes, general heating and loosening of rusted bolts, heat shrinking of electrical components, and de-icing frozen locks and pipes. Compared to Sievert’s Hot air burner which provides flameless heat for paint stripping, the Standard burner is for applications requiring an open flame.

The Cyclone burners wrap the flame around pipes for more uniform heating in brazing; the Standard burner is better for direct spot heating. The Pin-point burner is much smaller (8mm-10mm) and designed for fine electronics/jewelry; the Standard burner is for general-purpose work.

The Bottom Line

Sievert is widely regarded as a premium brand for handheld torches, known for Swedish engineering and durability. Users appreciate the modularity of the PowerJet system, though it’s relatively expensive compared to non-interchangeable torches and requires specific Sievert handles.

For Montana contractors who value tool efficiency, the PowerJet Standard tip delivers. The bayonet mount saves real time when switching between tasks. Multi-fuel compatibility eliminates gas availability headaches in remote areas. The integrated burner support works with Piezo ignition handles, meaning reliable starts even with cold hands and gloves.

The tip comes with a 2-year manufacturer’s limited warranty covering defects in materials and workmanship under normal use. Warranty terms may vary by distributor (e.g., Rothenberger in the US vs. Sievert AB in Europe).

Frequently Asked Questions

What torch handles work with this burner tip?

The Standard burner tip is compatible with Sievert PowerJet (2535) and Sievert MetalJet (2155) handles through the proprietary Twist ‘N Lock bayonet mount system.

How long does it take to change burner tips?

The complete process takes seconds: align bayonet tabs with slots, press in, turn 90 degrees clockwise to lock. No tools required.

What size pipes can this handle for soldering?

The Standard burner tip handles soft soldering on pipes up to 18mm (approximately 3/4 inch) diameter.

Does the tip work with standard propane cylinders?

Yes, the burner accepts Propane, Butane, MAPP, Ultramapp, and Ultragas — any standard fuel gas works at the specified 2 bar working pressure.