Ninja ICE HPT Cold-Weather Work Gloves

The Ninja ICE HPT glove line delivers cold-weather performance that actually works when temperatures drop below freezing. MCR Safety’s proprietary HPT (Hydropellent Technology) coating maintains flexibility down to -58°F while repelling liquids — solving the grip-and-warmth problem that plagues standard insulated gloves.

The platform targets contractors, warehouse workers, and anyone handling materials in cold, wet conditions. Four models serve different needs within the line, from basic palm coating to full coverage with cut resistance.

HPT Coating Makes the Difference

The HPT coating remains flexible down to -58°F — far beyond what standard nitrile or latex coatings can handle. The coating encapsulates air molecules for impact cushioning while maintaining dexterity.

The porous foam polymer coating repels liquids with 360-degree anti-wet treatment. Water beads off. Oil doesn’t soak in. The grip stays firm whether conditions are wet or dry.

This matters in Montana winters. Standard rubber coatings turn into hockey pucks at 20°F. HPT stays pliable at temperatures that would crack lesser materials. The coating technology sets these gloves apart from basic insulated options that sacrifice grip for warmth.

Model Comparison Within the Line

The Ninja ICE HPT platform includes four distinct models, each targeting specific work conditions:

Model	Coating Coverage	Key Feature	Best For
N9690	Palm and fingertips	Standard grip and flexibility	General cold-weather work
N9690FC	Fully coated	Maximum liquid protection	Wet conditions, freezer work
N9690HV	3/4 coated	High-visibility lime	Roadwork, low-light conditions
N9691	Palm and fingertips	A4 cut rating with HPPE shell	Sharp materials in cold

The standard N9690 uses palm and fingertip coating — enough protection for most tasks while keeping the back breathable. The N9690FC fully-coated version wraps the entire hand for jobs where liquid exposure hits from all angles.

The N9690HV adds high-visibility lime coloring for flaggers and road crews working Montana’s dark winter mornings. The N9691 bumps up to an A4 cut rating with a HyperMax HPPE shell — critical when handling sharp materials in sub-zero temperatures where cuts heal slowly.

Dual-Layer Construction Delivers Warmth Without Bulk

The 15-gauge nylon outer shell paired with 7-gauge brushed acrylic terry liner creates effective insulation without the bulk that kills dexterity. The terry loops trap warm air while the nylon shell blocks wind.

The breathable design allows moisture to escape from the inside. Sweat doesn’t build up and freeze like it does in rubber-dipped gloves. The dual-layer system works because each layer does its job — the outer handles abuse, the inner provides warmth.

Specification	Value
Shell Material	15-gauge high-tenacity nylon
Liner Material	7-gauge brushed acrylic terry
Temperature Rating	-4°F to 284°F
Cut Level	A3 (A4 on N9691)
Puncture Rating	Level 2
Abrasion Rating	Level 3

Who Should Buy These Gloves

Applications span cold storage, commercial fishing, outdoor construction, agriculture, frozen food processing, warehousing, airport baggage handling, and utilities work. Any job combining cold temperatures with wet conditions benefits from the HPT coating technology.

Users praise exceptional warmth without bulk and reliable grip in wet/icy conditions across 98 reviews averaging 4.76 stars. Some mention sizing runs slightly small or coating wears after intense industrial use — typical trade-offs for performance gloves.

Montana contractors working through winter appreciate gloves that don’t turn into frozen claws at 6 AM. The HPT coating technology solves real problems — maintaining grip on icy lumber, handling wet materials without soaking through, staying flexible when other gloves would crack.

FAQs

What makes HPT coating different from standard rubber coatings?

HPT maintains flexibility down to -58°F while standard coatings stiffen below freezing. The coating encapsulates air molecules for cushioning and features 360-degree liquid repellency, keeping grip firm in wet conditions where rubber fails.

Which model works best for freezer warehouse work?

The N9690FC fully-coated model provides maximum protection against moisture from all angles. Full coating prevents cold spots where partial coatings leave gaps, crucial for extended freezer shifts.

How should these gloves be cleaned?

Hand wash with mild detergent and air dry only. Avoid machine washing or high-heat drying which may damage the HPT coating. Store in a cool, dry place away from direct sunlight.

What’s the actual temperature range for these gloves?

The coating stays flexible from -4°F up to 284°F contact heat, though field reports show flexibility maintained down to -58°F. The dual-layer insulation provides warmth, while the HPT coating maintains grip across this range.

Are these cut-resistant enough for sheet metal work?

Standard models rate A3 for cut resistance — adequate for general construction but not sheet metal. The N9691 model offers A4 cut rating with HPPE shell construction for applications requiring higher cut protection.