The KP0800K’s 17,000 RPM motor and 5.7 lb weight deliver the best power-to-weight ratio in its class for professional framing and finish work. At 5.7 lbs with a 6.5A motor delivering 17,000 RPM, this planer offers the maneuverability overhead work demands without sacrificing cutting power.
Skip it if you’re just cleaning up a couple boards for a weekend project. This kit shines in professional framing and construction, window and door installation, and cabinetry. The precision matters when you’re fitting doors in Montana’s seasonal wood movement or flattening twisted studs that sat outside through a chinook cycle.
Power and Performance That Counts
The 6.5A motor spinning at 17,000 RPM puts this planer ahead of most competition. DeWalt’s D26676 runs a weaker 5.5A motor and cuts shallower at 1/16” versus Makita’s 3/32”. That extra 1/32” per pass adds up across a stack of lumber.
| Specification | Value |
|---|---|
| Motor | 6.5 Amps |
| No-Load Speed | 17,000 RPM |
| Planing Width | 3-1/4 inches (82 mm) |
| Max Depth per Pass | 3/32 inch (2.4 mm) |
| Max Rebate Depth | 11/32 inch (9 mm) |
| Weight | 5.7 lbs (2.6 kg) |
Makita weighs less than Bosch’s PL1632 (5.7 lbs vs 6.3 lbs) while matching the 6.5A power and beating the RPM (17,000 vs 16,500). Half a pound matters when you’re planing overhead or working all day. The weight distribution feels right too — the ergonomic rubberized handle keeps control where it should be.
The precision-machined aluminum base stays flat. Cheaper planers warp their bases after a season of use. The rigid die-cast aluminum housing takes jobsite drops without cracking. This matters in Montana where tools ride in cold trucks and hit frozen ground harder than they would in warmer states.
Depth Control for Real Work
Depth adjustment runs from 0 to 3/32” in 0.1mm increments. The click stops are positive — you feel each adjustment. No guessing if you moved the knob or not. Reliable depth adjustment knob gets consistent praise from users.
The 11/32 inch max rebate depth handles most door and window work without switching tools. Set your depth, lock it in, and run the whole job without fiddling. The lock-on button for continuous operation saves your trigger finger on long passes.
Blade System Built for Contractors
Uses standard 3-1/4” double-edged carbide or HSS blades (Part #D-46246). Double-edged means flip them when one side dulls — twice the life between changes. The easy blade-setting system uses the included 7mm socket wrench and blade gauge.
Blade changing requires unscrewing three installation bolts, removing the drum cover, and aligning blades using the gauge before tightening. Takes maybe five minutes if you’re slow about it. The gauge ensures both blades sit at exactly the same height — critical for avoiding ridges in your work.
The spring-loaded stand protects blades and workpiece when you set the tool down. Smart design that saves blade edges and prevents gouging your work surface. Small detail that shows Makita understands jobsite reality.
What’s Missing
Dust bag not included in the standard kit. You’ll need Makita dust nozzles (Part #451329-1) for 1-1/4” or 35mm vacuum hoses to connect shop vac. Port can clog if not using a vacuum — the shavings pack tight without suction.
DeWalt offers a longer 3-year warranty versus Makita’s 1-year limited warranty. If warranty length matters more than cutting depth and power, look at DeWalt. But warranty claims mean downtime, and this Makita runs reliable enough that most contractors never use the warranty anyway.
Kit Contents
The hard case kit (824892-1) includes:
- KP0800 3-1/4” Planer
- Blade Set (D-46246)
- Blade Gauge Assembly (123010-1)
- Socket Wrench (782209-3)
- Guide Rule (165581-2)
- Hard Tool Case (824892-1)
Everything needed except dust collection. The case protects your investment bouncing around in the truck.
The Verdict
Professional contractors rate it 4.6 out of 5 stars for good reason. The powerful motor for its size, lightweight design, and clean smooth finish out of the box make this a workhorse planer. At 11.7 lbs shipping weight the whole kit travels easy.
Best suited for contractors doing regular planing work — door and window installers, finish carpenters, framing crews dealing with warped lumber. The power-to-weight ratio beats anything else at professional grade. Montana’s log home and timber frame builders appreciate the precision for fitting massive beams.
Not worth it for occasional use. Rent one when you need it. But if you’re planing weekly, the time saved with that extra cutting depth and reliable operation pays for itself fast.
Frequently Asked Questions
Q: How deep can this planer cut in a single pass? Maximum depth per pass is 3/32 inch (2.4 mm). This beats most competition and means fewer passes on thick stock.
Q: What type of blades does the KP0800K use? It uses standard 3-1/4” double-edged carbide or HSS blades, Makita part number D-46246. Double-edged design gives you twice the life between blade changes.
Q: Can I connect this to my shop vacuum? Yes, with Makita dust nozzles (Part #451329-1) for 1-1/4” or 35mm vacuum hoses. The dust bag is not included and the port can clog without vacuum suction.
Q: How much does the complete kit weigh? The planer itself weighs 5.7 lbs (2.6 kg), while the complete kit shipping weight is 11.7 lbs. Light enough for all-day use without fatigue.
Q: What’s the warranty coverage? Makita provides a 1-year limited warranty plus a 30-day return/replacement policy at most major retailers. There’s also a 30-day free repair period for defects in materials or workmanship.
Ready to Get Started?
Our tools specialists can help you find the right Makita products for your project.
More from Makita
Explore All Makita Products
We carry Makita across all 11 Montana and Idaho stores.
