Husqvarna C83S 3/8″ .050″ 20″ Saw Chain

The C83S cuts sharpening time in half compared to standard chains. The C83S skip-tooth design has fewer cutters (every other link is a cutter), which reduces the power needed to drive the chain through the wood, maintains higher RPM on long bars, and cuts sharpening time in half. For contractors running 20-inch or longer bars, that’s money saved on maintenance and more time cutting.

High-performance professional and heavy-duty home cutting tasks. Usage with longer guide bars (20” to 32”) where chip clearance and engine RPM are critical. The skip-tooth pattern keeps chain speed high when other chains bog down.

Skip-Tooth Efficiency Makes the Difference

Reduced vibration and faster chain speed under heavy load compared to standard non-skip chains. That matters when you’re bucking big timber or processing beetle-kill pine all day. The S83G is the full-complement (non-skip) version of this 3/8” .050” chain, featuring more cutters which is better for shorter bars but harder for engines to pull on long bars.

Full Chisel Cutters: Square corner cutters for superior cutting efficiency and fast wood removal. Skip-tooth Design: Optimized for longer bars to maintain engine RPM and improve chip clearance. Full chisel means aggressive cutting in clean wood. Skip-tooth means your saw doesn’t bog when the chips pile up.

Specification	Value
Pitch	3/8”
Gauge	.050” (1.3 mm)
Drive Links (20” bar)	72
Cutter Type	Full Chisel (Square-ground)
Cutter Sequence	Full Skip (Skip-tooth)
Available Bar Lengths	20” (72DL), 24” (84DL), 28” (93DL), 32” (105DL)

Typically ‘Yellow Label’ (Professional use only) under ANSI standards due to full-chisel design and higher kickback risk. Professional chain for professional users.

X-Cut Technology and Pre-Stretched Benefits

X-CUT™ Technology: High-performance chain with improved sharpness and edge retention. Pre-stretched: X-CUT chains are pre-stretched, minimizing initial adjustments and tension issues. Pre-stretching matters. Chains that stretch after installation mean stopping to adjust tension, losing time and momentum.

Sharp Out-of-the-Box: Ready for immediate cutting without initial sharpening. Golden Tie Strap: A visual marker for easier identification of start and stop points during manual filing. The golden tie strap saves fumbling around looking for your starting point when hand-filing.

Users back up the manufacturer claims. Highly positive reviews focused on cutting speed and edge retention. Specific user feedback includes:

• Exceptional cutting speed and performance
• Edge stays sharp much longer than standard chains
• Noticeably less stretch after initial break-in
• Higher chain speed under load

7/32” round file (industry standard for 3/8” chain) for sharpening. Skip-tooth sequence allows for faster maintenance cycles (fewer cutters to sharpen).

Compatibility and Applications

Husqvarna, Poulan, Poulan Pro, Jonsered, RedMax, Zenoah, McCulloch compatibility means this chain fits most saws running 3/8” .050” setups. Husqvarna 562 XP Mark II, Husqvarna 460 Rancher, Professional saws with 3/8” sprockets are specific examples.

Suitable for both hardwood and softwood cutting under professional conditions. In Montana’s mixed forests, that flexibility counts. Whether you’re dropping lodgepole pine or cutting through occasional larch, the C83S handles it.

30-day manufacturer’s warranty (Walmart listing); returns: Retailers typically offer 30 to 45-day return policies (Husqvarna Parts Online, PartsWarehouse).

FAQ

What makes skip-tooth chains better for long bars? The C83S skip-tooth design has fewer cutters (every other link is a cutter), which reduces the power needed to drive the chain through the wood, maintains higher RPM on long bars, and cuts sharpening time in half. Fewer cutters means less drag through the cut.

Is the C83S pre-sharpened from the factory? Sharp Out-of-the-Box: Ready for immediate cutting without initial sharpening.

What file size does the C83S require? 7/32” round file (industry standard for 3/8” chain)

Does the X-Cut technology reduce stretching? Pre-stretched: X-CUT chains are pre-stretched, minimizing initial adjustments and tension issues. Users report Noticeably less stretch after initial break-in compared to standard chains.

What safety rating does this chain carry? Typically ‘Yellow Label’ (Professional use only) under ANSI standards due to full-chisel design and higher kickback risk. Not a homeowner safety chain.

Can I run this on a Poulan or Jonsered saw? Husqvarna, Poulan, Poulan Pro, Jonsered, RedMax, Zenoah, McCulloch brands are all compatible as long as your saw runs a 3/8” pitch .050” gauge system.