The FS 1400/2-KP-Set gives you 110 inches of continuous cutting capacity — that’s over 9 feet of dead-straight guidance for breaking down full sheets without repositioning. But here’s what sets this kit apart from every other guide rail system: 60 adhesive pads that let you run cuts on vertical surfaces where clamps won’t reach.
Skip this if you’re just crosscutting 2x4s on sawhorses. This kit shines for precision straight cuts on floors, work surfaces, or walls — anywhere traditional clamping creates problems or wastes time. At 4.7 out of 5 stars based on retailer aggregations, contractors have validated what Festool claims: this system delivers repeatable precision for finish work.
The Adhesive Pad Advantage for Non-Clamp Work
The self-gripping adhesive pads secure the rail on horizontal and vertical surfaces, and they’re removable without leaving residue. Think about trimming door bottoms in place, cutting drywall patches on walls, or working on installed countertops where C-clamps would damage the underside. Insert the pads into dedicated short slots on the bottom of the KP rails and you’ve got a stable cutting platform without traditional hold-downs.
The kit includes 60 adhesive pads total — 2 bags of 30 each. That’s enough for multiple setups before needing replacements. This allows for guided cuts on walls and other vertical surfaces, which enhances flexibility for various job site applications. Standard guide rails force you to lay materials flat or rig awkward clamping solutions. The KP system eliminates that constraint.
Users report Festool rails deliver higher precision and straighter edges compared to Makita rails, which some describe as twice as ‘crooked’ over length. When you’re scribing cabinets to walls or cutting expensive sheet goods, that precision difference matters.
Extended Cutting Range with Self-Aligning Connection
Two 55-inch rails connect for 110 inches total length using the included FSV/2 connectors. Slide the connectors into the accessory grooves and tighten the hex screws to align the rails. The self-aligning connectors ensure perfectly straight long cuts — critical when you’re running the full length of a sheet.
High-quality extruded aluminum construction handles Montana’s temperature swings without warping. The aluminum won’t expand and contract like lesser materials, maintaining that 0.2 mm (0.01 inch) deviation over cut length when used properly.
| Specification | Value |
|---|---|
| Individual Rail Length | 55 inches (1400 mm) |
| Total Connected Length | 110 inches (2800 mm) |
| Accuracy | 0.2 mm (0.01 in) deviation over cut length |
| Weight (shipping) | 17.21 lbs |
| Adhesive Pads Included | 60 (2 bags of 30) |
Tool Compatibility Beyond Track Saws
This isn’t just a track saw accessory. Compatible saws include TS 55, TS 60, TS 75, TSC 55, HK 55, HK 85, and HKC 55. But the system also works with routers OF 1010, OF 1400, and OF 2200 (with guide rail adapter) plus jigsaws PS 300 and PS 420 (with adapter).
Applications include routing grooves and channels with the router adapter. Set up once, route dados perfectly straight across an entire sheet. The accessory groove accommodates additional tools like clamps and angle stops for repetitive cuts.
The system maintains backward compatibility with previous generations of Festool FS/2 Guide Rails. If you’ve already invested in Festool’s rail system, this kit extends your capability without starting over. Many Makita and Milwaukee track saws work with the standard track profile too — though you’ll get best results with Festool’s own tools.
Complete Kit Contents Drive Immediate Use
Here’s what actually comes in the box:
| Item | Quantity | Details |
|---|---|---|
| FS 1400/2-KP Guide Rails | 2 | 55 inches each |
| FSV/2 Connectors | 2 | For joining rails |
| Adhesive Pads (FS-KP/30) | 60 | 2 bags of 30 pads each |
| Screw Clamps (FSZ 120) | 2 | 4-11/16 inches |
| FS-BAG 1400 Carrying Bag | 1 | Full kit storage |
| Hex Key | 1 | For connectors |
Users often prefer ratchet clamps (FS-HZ) over the included screw clamps, but the screw clamps work fine for most applications. The FS-BAG 1400 storage bag earns praise from reviewers — everything stays organized between jobsites.
The rail features Festool’s integrated splinterguard and cushioned strip on bottom to protect workpieces from marring. The splinterguard must be trimmed before first use by running the saw along the rail — this creates zero-clearance alignment specific to your saw blade.
The warranty matters on a precision tool investment: 3-year Warranty All-Inclusive coverage includes wear-and-tear protection, 10-year spare part availability, 30-day money-back guarantee, and free shipping for warranty repairs. That’s confidence in build quality, not just defects coverage.
Who Should Buy This Kit
Buy this if you’re doing finish work where precision matters and traditional clamping creates problems. Cabinet installers working on vertical surfaces. Trim carpenters scribing to existing walls. Anyone breaking down full sheets regularly who values straight cuts over speed.
The vertical capability alone justifies the kit for certain trades. Add the 110-inch capacity, multi-tool compatibility, and proven accuracy — you’ve got a system that earns its keep on quality work. The KP version’s slots for adhesive pads and center cutout for Systainer handles distinguish it from standard FS/2 rails.
Skip it if you’re rough-framing or doing basic crosscuts where a circular saw and Speed Square work fine. This is precision equipment for precision work. The investment only makes sense if straight cuts and clean edges affect your bottom line.
Frequently Asked Questions
What’s the actual cutting accuracy? The system delivers 0.2 mm (0.01 inch) deviation over the full cut length when used properly. That’s less than the thickness of two sheets of paper over 110 inches.
How do the adhesive pads work on different surfaces? The self-gripping adhesive pads provide secure hold on horizontal and vertical surfaces and are removable without leaving residue. They’re designed for smooth surfaces like laminate, melamine, or painted walls.
Does this work with Makita track saws? Yes, the rails are compatible with many Makita and Milwaukee track saws that use the standard track profile. However, the zero-clearance splinterguard needs to be cut specifically for your saw.
What’s the weight limit for vertical applications? The 60 included adhesive pads distribute the rail weight plus moderate downward pressure from cutting. Heavy routing operations might need supplemental support.
How long do the adhesive pads last? You get 60 pads total in 2 bags of 30 each, and they’re removable for reuse on clean surfaces. Order code FS-KP/30 for replacements.
Ready to Get Started?
Our tools specialists can help you find the right Festool products for your project.
More from Festool
Explore All Festool Products
We carry Festool across all 11 Montana and Idaho stores.
