Festool Guide Rail Accessory Kit SYS3 M 137 FS/2-Set

The Festool Guide Rail Accessory Kit transforms any track saw setup into a precision cutting system for cabinet makers and contractors who need angled cuts, repeatable stops, and safer plunge operations. This kit bundles six essential accessories that solve the most common guide rail limitations — plus organizes everything in a stackable Systainer case.

Montana’s custom home market demands precision. Cabinet makers building mountain-modern kitchens can’t afford sloppy angles or inconsistent dimensions. This kit delivers the accuracy tools that separate professional work from amateur hour.

Component Value and Precision Capabilities

The kit includes an angle stop adjustable from -60° to +60°, two FSV/2 connecting pieces for joining rails, two FSZ 120 screw clamps, a cable/hose deflector, a limit stop (KickbackStop), and a combination hex key. The angle stop represents the most valuable component when purchased individually, with the complete set offering significant savings compared to buying pieces separately.

The angle stop attaches without tools and locks at any angle between -60° and +60°. Cabinet face frames, compound miters, angled drawer slides — this handles them all. The KickbackStop serves dual duty as both a limit stop for consistent repeat cuts and a safety device that prevents kickback during plunge cuts.

Installation stays simple: the angle stop slides into the T-track and locks with a lever, rail connectors insert and tighten with the included hex key, the deflector press-fits onto the rail end, and the limit stop clamps with a thumb screw.

Component	Function
FS-WA Angle Stop	-60° to +60° cuts
FSV/2 Connectors (2)	Join multiple rails
FSZ 120 Clamps (2)	Secure rail to workpiece
FS/2-AW Deflector	Prevent cable snags
FS-RSP Limit Stop	Repeat cuts/kickback prevention
Systainer³ M 137	Organized storage

Compatibility and System Integration

The kit works with Festool’s FS/2 Guide Rail System and is compatible with TS 55, TS 60, TS 75 plunge saws, HK 55 and HKC 55 carpentry saws, plus Festool routers when used with guide rail adapters. No adapter hassles or third-party workarounds — these components integrate directly with existing Festool track systems.

The connecting pieces align two guide rails for cuts beyond a single rail’s length. Kitchen countertops, full sheets of plywood, long rips on glue-ups — the connectors maintain accuracy across the joint. Alignment uses the included SW 5/SW 3 hex key, not guesswork and shims.

Job Site Organization

The Systainer³ M 137 measures 15.59” x 11.65” x 5.39” and weighs 3.918 lbs fully loaded. Everything stays organized in custom-molded compartments. No loose parts rattling around the truck bed.

Systainer³ cases connect to all past and present generations of Systainer. Stack it with other Festool cases, lock them together, transport as one unit. Montana contractors driving between Kalispell and Whitefish job sites don’t need components scattered across three toolboxes.

The deflector keeps dust collection hoses and power cords from snagging on the rail end. Simple detail that prevents the rage-inducing moment when a hose yanks mid-cut.

The Bottom Line

User reviews average 5.0 stars with comments highlighting the “above and beyond” design and value of having all rail accessories in one case. Festool backs it with their Warranty All-Inclusive: 3-year comprehensive coverage including wear-and-tear if registered within 30 days.

Worth it for finish carpenters and cabinet makers who bill by precision. The angle stop alone justifies the kit for anyone cutting anything beyond 90-degree crosscuts. Purchasing as a kit provides better value than buying components individually.

Not for homeowners with a track saw collecting dust. This kit assumes you’re already using guide rails professionally and need to expand capabilities. Third-party options like TSO Products exist but typically cost more while offering similar functionality.

FAQs

Does this kit include a guide rail? No. The kit contains accessories for existing guide rails: clamps, angle stop, deflector, limit stop, connectors, and hex key in a Systainer case. Rails sold separately.

What’s the actual angle range on the angle stop? The angle stop adjusts from -60° to +60° and attaches to the guide rail without tools.

Will this work with older Festool guide rails? Yes, it’s compatible with the FS/2 Guide Rail System. The Systainer³ case also connects to all generations of Systainer for transport.

What exactly does the KickbackStop do? It functions as both a limit stop for repeat cuts and prevents kickback when plunge-cutting into workpieces. Set it once, make identical cuts repeatedly.

Is the Systainer case worth the space it takes? At 15.59” x 11.65” x 5.39” and under 4 lbs, it’s compact. Custom compartments keep every component organized and protected. Beats fishing through a bucket for that angle stop.