DeWalt 24″ Toolbox with Case: The 2-in-1 Jobsite Storage That Actually Works

The DeWalt DWST24070 gives you a detachable power tool case on top of a 70-pound capacity tote. Large lower tote with a detachable power-tool case on top — that’s the whole pitch. At 88% recommendation rate from 454 reviewers, contractors have spoken.

This isn’t waterproof storage. It’s not part of DeWalt’s TSTAK or ToughSystem lines. The unit won’t latch with TSTAK or ToughSystem modules. What you get is straightforward: a big tote that holds your corded tools, bulk fasteners, and jobsite supplies, plus a removable case for your drill and driver.

The 2-in-1 Design That Contractors Asked For

Press the front button, lift off the power tool case. Take just your drill and impact driver into the attic while the heavy stuff stays in the truck. When you need everything, the cases lock together with metal latches that won’t strip like plastic tabs.

Front push-button mechanism beats fumbling with side clips when your hands are full. Both sections have their own handles — full-size metal carry handle on the main tote, integrated handles on the power tool case.

The modular approach makes sense. Most trips from the truck don’t require hauling 70 pounds of tools. Grab the small case for quick repairs. Load both for bigger jobs. The detachable design turns one toolbox into two different storage solutions.

Built-In Work Surface Features

Integrated V-groove on the lid for holding lumber or pipes during cutting — finally, a toolbox lid that does more than just close. Set a 2x4 in the groove, it won’t roll while you mark or cut. Same principle works for PVC, conduit, or copper pipe.

The built-in ruler on the lid handles those quick “is this stud 16 or 24 inches from the last one?” checks without digging for a tape measure. Nothing revolutionary, but it’s there when you need it.

Think of it as a micro workbench. Not replacing your sawhorses, but perfect for those times you’re cutting blocking in a crawlspace or trimming pipe in a mechanical room. The V-groove holds the material steady while the ruler confirms your measurement.

Real-World Capacity and Construction

Specification	Value
Weight Capacity	70 lbs
Unit Weight	7.41 lbs
Dimensions	26.23” W x 13.65” D x 11.05” H
Handle Length	7 in
Material	High-impact Structural Foam Resin with metal hardware

Seventy pounds handles most hand tool collections plus a circular saw. The heavy-duty anti-rust metal latches won’t corrode after a winter in the truck bed. Structural foam resin takes impacts better than blow-molded plastic — drop it off the tailgate, it bounces instead of cracking.

Users report occasional latch alignment issues and warn that metal hinge points can crack under extreme stress. Fair critique. But perfect isn’t the goal. Functional is.

The 7-inch metal handle balances loaded weight better than those skinny plastic grips on cheaper boxes. Your hand doesn’t cramp carrying 50 pounds of tools across a muddy jobsite.

Who Should Buy This

Worth it for contractors who want modular storage without investing in interlocking systems. The detachable case alone justifies the purchase if you’re tired of digging through one giant toolbox for your most-used tools.

Skip it if you need weather-sealed storage. Reviews confirm this isn’t weather-sealed. This stays in the truck or shop, not outside overnight. Also skip if you’re already invested in TSTAK or ToughSystem — this won’t integrate with those ecosystems.

The V-groove cutting support and built-in ruler turn any flat surface into a basic workstation. Perfect for service calls where you can’t haul a full workbench. The 88% recommendation rate tells the real story — contractors who bought it would buy it again.

Frequently Asked Questions

Q: Is the DeWalt DWST24070 waterproof? A: No. This toolbox offers no weather protection. Keep it under cover or inside your vehicle.

Q: Will this connect to DeWalt’s TSTAK or ToughSystem storage? A: The unit won’t latch with TSTAK or ToughSystem modules, though it may physically stack on top of ToughSystem rolling boxes if the handle is cleared. It’s a standalone storage solution.

Q: How much weight can the toolbox hold? A: 70 lbs total capacity. That’s enough for most hand tool collections plus power tools.

Q: What comes with the DWST24070? A: 1 x 24-inch Jobsite Tote and 1 x Removable Power Tool Case. No additional organizers or dividers included.

Q: Can I lock this toolbox? A: Yes, but locks sold separately.