Bosch 10" Table Saw with Stand

The Bosch 10” table saw with Gravity-Rise stand gives contractors a genuinely portable saw with stationary-level cutting capacity. At 94 pounds total, it packs a 15-amp motor delivering 4.0 Max HP and up to 32-1/8 inches of rip capacity. The standout feature? That single-action Gravity-Rise stand with 8-inch treaded wheels that actually work on rough jobsite terrain.

Skip it if you’re cutting sheet goods in a finished shop all day. A cabinet saw makes more sense there. This kit shines for framing contractors, finish carpenters, and anyone hauling tools between Montana jobsites where setup speed matters as much as cutting capacity.

Gravity-Rise Stand: Why Contractors Actually Care

The Gravity-Rise stand sets up and tears down with a single foot pedal action. No pins, no fiddling with release mechanisms while balancing a 58-pound saw. The 8-inch treaded rubber-composite tires handle gravel driveways, muddy jobsites, and the inevitable obstacles between your truck and where you need to cut.

Most portable saw stands use 6-inch wheels that bog down in soft ground. Bosch went with 8-inch treaded wheels that roll over extension cords, scrap lumber, and uneven terrain without tipping. The difference matters when you’re wheeling 94 pounds of saw across a jobsite at 7 AM.

Customer feedback consistently highlights the Gravity-Rise stand as “best-in-class” for portability. Users report it’s “easy to move around a jobsite” — not something you hear about most contractor saws.

Two Models, Two Fence Systems

Bosch offers two professional models with different fence designs:

Specification	4100XC-10	GTS15-10
Fence System	SquareLock	Rack-and-Pinion
Rip Capacity (Right)	30 inches	32-1/8 inches
Rip Capacity (Left)	8.5 inches	14-1/8 inches
Max Cut Depth at 90°	3-1/8 inches	3-9/16 inches
Max Cut Depth at 45°	2-1/4 inches	2-1/2 inches
No-Load Speed	3,650 RPM	3,800 RPM
Total Weight with Stand	94 lbs	91 lbs

The GTS15-10’s rack-and-pinion fence gets particularly strong reviews for accuracy, while the 4100XC-10’s SquareLock system offers simpler operation. Both deliver precision that rivals stationary saws.

Power and Cutting Performance

Both models run 15-amp motors at 120V AC, producing 4.0 Max HP. That’s real cutting power, not marketing fluff. Constant Response circuitry maintains blade speed under heavy loads — critical when ripping pressure-treated lumber or dense hardwoods.

The cast aluminum table measures 30 x 22.5 inches, providing stable support for large workpieces. The 10-inch blade with 5/8-inch arbor accepts standard blades, and the saw handles dado sets up to 13/16-inch width with an optional insert.

Soft-start circuitry reduces startup torque, preventing those annoying breaker trips when you’re sharing a circuit with other tools. Restart protection prevents accidental startup after power loss — a safety feature that should be standard but isn’t.

Safety Features That Actually Work

The Smart Guard System includes a riving knife, anti-kickback pawls, and clear barrier guard. The riving knife stays aligned with the blade through bevel adjustments, reducing kickback risk without constant readjustment.

Bevel range runs from -2° to 47°, with positive stops at common angles. The negative bevel capability handles those occasional oddball cuts without workarounds.

A 2.5-inch dust port connects to standard vacuum hoses. Dust collection on any jobsite saw is mediocre at best, but at least Bosch uses a standard size that works with common shop vacs.

Jobsite Reality Check

Common complaints center on stand assembly complexity and occasional durability issues with the 4100XC-10. Some users report the stands develop wobble after heavy use. The instruction manual can be difficult to follow for fine adjustments.

Quality control issues occasionally surface, with some units arriving with misaligned stops from the factory. Not deal-breakers, but annoying when you’re trying to get a job done.

Compared to the DeWalt DWE7491RS, DeWalt offers slightly larger rip capacity at 32.5 inches, but the Bosch Gravity-Rise stand is often cited as superior for mobility and ease of setup.

Bottom Line

The Bosch 10” table saw earns its reputation through that Gravity-Rise stand and genuine cutting capacity. Montana contractors dealing with rough jobsite terrain, long hauls from truck to work area, and the need for quick setup will appreciate the engineering that went into portability.

The GTS15-10 with its rack-and-pinion fence delivers better precision for finish work. The 4100XC-10 offers simpler operation. Either model provides the power and capacity to handle real jobsite demands.

At 94 pounds, it’s still a two-person lift into a truck bed. But once on site, one person can wheel it anywhere and set it up in seconds. For contractors who measure productivity in completed jobs rather than shop time, that mobility advantage matters.

Frequently Asked Questions

What’s the real difference between the 4100XC-10 and GTS15-10 models?

The main difference is the fence system — the 4100XC-10 uses a SquareLock fence while the GTS15-10 features a rack-and-pinion fence. The GTS15-10 also provides 2-1/8 inches more rip capacity on the right side and significantly more left-side capacity. The GTS15-10 runs slightly faster at 3,800 RPM versus 3,650 RPM and cuts deeper at both 90° and 45° angles.

Can this saw handle a full dado set?

Yes, both models accept 10-inch dado sets up to 13/16-inch width, but you’ll need an optional dado insert like the TS1014. The saws are also compatible with zero-clearance inserts for cleaner cuts on veneered plywood.

How difficult is the initial assembly?

The saw requires assembly of the Gravity-Rise stand, including mounting legs and wheels. Users report complexity in stand assembly as a common frustration. Plan on 30-45 minutes for first-time setup with careful attention to the manual.

What comes in the box?

The kit includes the 10-inch table saw, Gravity-Rise wheeled stand, 10-inch carbide-tipped blade, rip fence (SquareLock or rack-and-pinion depending on model), miter gauge, Smart Guard System components, push stick, and adjustment wrenches. All components store onboard — no loose parts to lose between jobsites.

How does this compare to other jobsite saws for Montana conditions?

The 8-inch treaded wheels handle rough terrain better than competitor’s smaller wheels. The 4.0 HP motor maintains power when cutting dense lumber species. The Gravity-Rise stand’s single-action setup beats multi-step folding stands when you’re setting up in cold weather with gloves on. The main trade-off is weight — at 94 pounds, it’s heavier than some competing saws, but that weight includes a more robust stand.