DaVinci’s two-piece hip and ridge tiles deliver Class 4 impact resistance and lifetime warranty protection at 7x18 inches with precise 6-inch exposure. These synthetic composite tiles offer contractors a lighter-weight, maintenance-free alternative to natural slate, engineered specifically for the punishment Montana weather delivers.
The two-piece design matters for precision work on complex rooflines. At 7x18 inches, these tiles are narrower than the 12-inch one-piece version, offering more precision for hips. That extra control pays off when capping off timber frame projects in Whitefish or matching existing slate profiles on historic restorations.
Installation Requirements and Field Compatibility
DaVinci specifies corrosion-resistant nails at 1-1/4 inch minimum, placed 3/4 inch from the edge. The system requires ≥4:12 pitch roofs with synthetic underlayment. No exceptions on the underlayment — Montana’s freeze-thaw cycles demand that extra protection layer.
The fastener placement spec isn’t negotiable. 3/4 inch from the edge provides the hold without risking edge cracks during temperature swings. Contractors working near the Front know what 50-degree temperature swings do to improperly fastened ridge caps.
Installation follows either hip starter method or double-course method, with flashing and chalk lines required for alignment. The tiles work with DaVinci Composite Slate and Shake field tiles, standard roof decking (OSB or Plywood), and standard flashing and ridge vent systems.
Weather Performance Certifications
The certification list reads like a Montana roofing wishlist:
| Specification | Rating | Source |
|---|---|---|
| Impact Resistance | Class 4 (UL 2218) | manufacturer |
| Fire Rating | Class A (ASTM E108) | manufacturer |
| Wind Resistance | 110 mph | manufacturer |
| Warranty | Lifetime Limited Material (typically up to 50 years) | manufacturer |
That Class 4 impact rating handles Montana hailstorms that turn lesser products into Swiss cheese. The Class A fire rating meets wildfire zone requirements across the state’s WUI areas. 110 mph wind resistance stands up to chinook gusts that rip standard three-tabs off decks.
The composite material uses pure virgin resins, UV and thermal stabilizers, and highly-specialized fire retardant. No recycled content that degrades under UV bombardment at elevation. Manufacturing happens in Lenexa, Kansas — Made in the USA.
Weight and Coverage Calculations
Bundle weight runs approximately 15-20 lbs with 20 pieces per bundle, covering 5 linear feet at 6-inch exposure. Compare that to natural slate hip and ridge at 40-50 pounds per bundle. Crews appreciate hauling half the weight up ladders, especially on steep-pitch mountain homes.
The math works out simple: 20 pieces per bundle at 6-inch exposure equals 5 linear feet coverage. Order accordingly — Montana’s short construction season doesn’t leave room for material shortages in September.
Thickness varies by profile: 1/2 inch butt thickness for Standard Slate, 5/8 inch for Standard Shake, with 1/8 inch top thickness. That graduated profile sheds water properly while maintaining the dimensional stability synthetic products deliver.
The two-piece design offers more than aesthetics. Professional installers appreciate the interlocking design and reduced weight compared to natural stone. Contractors also value the high-performance ratings including Class A Fire Rating, Class 4 Impact Rating, and wind resistance up to 180 mph — though the manufacturer specs show 110 mph rating for these specific hip and ridge tiles.
Montana contractors know the difference between products that survive one winter and those that last decades. DaVinci’s two-piece hip and ridge system earns its place through certified performance, not marketing promises. The lighter weight helps on retrofits where structural loading matters. The impact resistance handles hail that would crack natural slate. The precise dimensions work with modern ridge vent systems without modification.
For rooflines that face everything from August hail to January chinooks, these tiles deliver measurable advantages over both natural slate and standard shingle ridge caps. The premium pays off in reduced callbacks and warranty claims — currencies that matter more than material cost in Montana’s unforgiving climate.
Frequently Asked Questions
Q: What size are DaVinci two-piece hip and ridge tiles, and how much area does a bundle cover?
DaVinci two-piece hip and ridge tiles measure 7 inches by 18 inches each, with a standard 6-inch exposure. Each bundle contains 20 pieces and covers 5 linear feet of hip or ridge at the standard exposure, weighing approximately 15-20 pounds per bundle.
Q: What’s the difference between DaVinci’s two-piece and one-piece hip and ridge tiles?
DaVinci’s two-piece tiles at 7x18 inches are narrower than their 12-inch one-piece version, offering more precision for hip installations. Both styles feature interlocking designs, but the two-piece configuration provides better control on complex rooflines and transitions.
Q: What weather ratings do DaVinci hip and ridge tiles carry for Montana installations?
DaVinci hip and ridge tiles carry Class 4 impact resistance (UL 2218), Class A fire rating (ASTM E108), and 110 mph wind resistance. The tiles come with a Lifetime Limited Material Warranty that typically extends up to 50 years, covering defects including splitting, cracking, and rotting.
Q: What are the installation requirements for DaVinci two-piece hip and ridge tiles?
DaVinci requires minimum 4:12 roof pitch with synthetic underlayment, using corrosion-resistant nails at least 1-1/4 inches long placed 3/4 inch from the tile edge. Installation follows either hip starter method or double-course method, requiring flashing and chalk lines for proper alignment.
Q: Are DaVinci hip and ridge tiles compatible with other roofing materials?
DaVinci two-piece hip and ridge tiles are designed to work with DaVinci Composite Slate and Shake field tiles, standard OSB or plywood roof decking, and conventional flashing and ridge vent systems. The tiles integrate seamlessly with both DaVinci’s slate and shake product lines.
Q: What thickness options are available for DaVinci two-piece hip and ridge tiles?
DaVinci offers two thickness profiles: Standard Slate with 1/2 inch butt thickness and Standard Shake with 5/8 inch butt thickness, both tapering to 1/8 inch at the top. The graduated profile ensures proper water shedding while maintaining dimensional stability.
Ready to Get Started?
Our roofing specialists can help you find the right DaVinci products for your project.
More from DaVinci
Explore All DaVinci Products
We carry DaVinci across all 11 Montana and Idaho stores.
