Integrity Select Latex Semi-Gloss House Paint White 1G

Worth it for contractors who need dependable coverage and weather resistance on exterior surfaces. The 350-400 sq ft per gallon coverage saves trips back for more paint, the 100% acrylic formula flexes through Montana’s freeze-thaw cycles, and the self-priming feature handles most surfaces without a separate primer coat.

Skip it if you’re painting raw cedar or redwood. Those woods need an oil-based primer to block tannin bleed-through. This paint’s self-priming formula works on most surfaces but won’t stop those stubborn wood stains.

Coverage and Application Performance

Coverage runs 350-400 square feet per gallon depending on surface porosity. That’s honest math for contractors bidding jobs. Smooth, previously painted siding hits the high end. Rough-sawn wood or porous stucco eats more paint.

Specification	Value
Coverage	350-400 sq ft/gal
Dry to Touch	1-4 hours at 77°F
Recoat Time	2-4 hours
Application Temperature	35°F-90°F
Recommended Coats	1-2 coats

For spraying, run 2000 psi through a .015-.019 tip. Those specs work with most contractor-grade airless rigs. Premium synthetic brushes and roller covers handle the 100% acrylic formula without breaking down.

The real advantage shows up in coat count. One coat often does the job on previously painted surfaces. That cuts labor time in half compared to products that always need two coats.

Temperature Flexibility and Montana’s Short Season

The 35°F minimum application temperature stretches Montana’s painting season. Start painting in late April instead of waiting for consistent 50-degree days. That extra month matters when you’re booked through October.

Touch dry in 1-4 hours at 77°F means you can get a second coat on the same day. But here’s the catch — that’s at 77 degrees with 50% humidity. Drop the temperature to 45 degrees and dry time doubles. Plan accordingly.

The paint needs to stay above 35°F for 48 hours after application. Watch those overnight lows. A surprise cold snap can ruin fresh paint even if daytime temps look fine.

Surface Compatibility

This paint handles wood, hardboard, aluminum siding, vinyl siding, masonry, brick, stucco, cement panels, and primed metal. That’s every common exterior surface in Montana except raw metal and floors.

The self-priming feature means no separate primer on most of these surfaces. Saves a full application cycle. But don’t get lazy — stains from knots, rust, or water still need spot priming before the topcoat.

Vinyl siding deserves special mention. Not all paints stick to vinyl properly. This one does. The 100% acrylic formula bonds without the cracking you see with cheaper paints when vinyl expands and contracts.

Weather Resistance That Matters

The 100% acrylic formula delivers the flexibility Montana exteriors need. Cheaper vinyl-acrylic blends turn brittle after a few freeze-thaw cycles. Pure acrylic stays flexible year after year.

Mold and mildew resistance comes built in. That matters more than you’d think in Montana. Spring snowmelt keeps north-facing walls damp for weeks. Summer irrigation overspray hits foundations. Without mildew resistance, you’re back repainting in three years.

The paint resists cracking and peeling — the two failures that let moisture into siding. Once water gets behind paint, it’s game over. The wood rots, paint bubbles, and the whole wall needs stripping.

Fade resistance keeps colors looking fresh despite high-altitude UV exposure. White stays white instead of yellowing. Colors hold their depth instead of washing out after two summers.

Frequently Asked Questions

Is spraying possible in cold weather? The minimum application temperature is 35°F. But cold paint sprays poorly — it won’t atomize properly and leaves an orange-peel texture. Warm the paint to at least 50°F before spraying, even if air temperature allows application.

Is primer necessary over old paint? The self-priming formula handles most previously painted surfaces without a separate primer. But spot-prime any bare wood, rust stains, or water marks first. Knots, rust, and water stains will bleed through without proper spot priming.

How long before rain? Don’t apply when rain is expected within 2.5 hours. That’s cutting it close for Montana’s afternoon thunderstorms. Morning application gives you the best weather window.

Will one coat really cover? One coat is often sufficient for most surfaces. The key word is “often.” Dark colors over light need two coats. Porous surfaces need two coats. But repainting white over white? One coat usually works.

Does the semi-gloss finish show imperfections? Semi-gloss shows every flaw in the surface. Nail pops, bad caulk lines, rough patches — they all telegraph through. Either fix the surface properly or drop down to satin sheen.