The RAC 619 delivers exactly what contractors need for thick exterior coatings — a 0.019-inch orifice (approximately 0.48 mm) paired with 12 to 14 inches of fan width. That’s the sweet spot for spraying elastomeric coatings on Montana’s weather-beaten exteriors, where standard tips choke on high-viscosity materials.
This tip earns its keep with a 4.6 out of 5 star rating across over 1,000 Home Depot reviews, with contractors specifically noting its performance with thick elastomeric paint. When you’re coating barn sides in the Mission Valley or re-sealing a warehouse in Great Falls, that orifice size matters.
Performance That Handles Montana’s Coating Demands
The specifications tell the real story about what this tip can handle:
| Specification | Value |
|---|---|
| Orifice Size | 0.019 inch (approx. 0.48 mm) |
| Fan Width | 12 to 14 inches |
| Material | Durable Tungsten Carbide |
| Technology | SoftSpray |
The 0.019-inch orifice is designed for larger surfaces and higher-viscosity materials like thick exterior latex. That’s not marketing fluff — it’s the difference between fighting clogs all day and laying down smooth coats of elastomeric on concrete block.
The tungsten carbide construction resists wear for extended life. In a market where contractors might spray 50 gallons of stain on a log home in a single day, durability isn’t optional. Cheaper tips wear out mid-project. This one keeps its pattern.
The Reverse-A-Clean (RAC) design lets you twist the tip to clear clogs easily, reducing downtime. No removing the tip from the spray guard, no fishing for a pin to clear the orifice. Just twist, blast the clog out, twist back, and keep spraying. On a commercial job where time is money, that efficiency adds up.
SoftSpray Technology and Application Control
SoftSpray technology delivers a softer spray pattern for a professional-quality finish with reduced overspray. The softer pattern means better control when you’re cutting close to windows or working near vehicles. Less overspray translates directly to material savings — critical when you’re spraying premium elastomerics at current prices.
The 12-14 inch fan width provides high coverage on large surface areas, making it ideal for:
- Walls, ceilings, decks, fences, house exteriors
- Exterior/interior latex paints
- Primers
- Enamels
- Stains
- Polyurethanes
- Lacquers
The wide fan pattern makes sense for Montana’s agricultural buildings. When you’re spraying a 60×120 pole barn, narrower tips just waste labor. This width covers ground while maintaining pattern consistency.
Equipment Compatibility
The tip fits Graco TrueAirless spray guns, Graco Magnum spray guns, and is compatible with RAC X systems. That covers most professional setups contractors run in this market. It installs into compatible Graco or Magnum spray guards — standard mounting that any spray hand knows.
Contractors appreciate its ease of cleaning and maintenance, making it a popular choice among professionals who need reliable performance with minimal downtime. That’s the real verdict from the field — not just that it works, but that it keeps working through multiple jobs without constant babysitting.
Frequently Asked Questions
Q: What makes the 0.019-inch orifice better for thick coatings than smaller tips?
A: The larger orifice handles higher viscosity without clogging. Elastomerics and heavy-bodied exterior paints flow through smoothly where a 0.015 or 0.017 tip would struggle and require thinning.
Q: How does the Reverse-A-Clean feature save time on the job?
A: Twist the tip to clear clogs without removing it from the spray guard. No disassembly, no hunting for clearing pins. A clog that might cost 5 minutes with a standard tip takes 30 seconds with RAC.
Q: Is the tungsten carbide worth the extra cost over standard tips?
A: Tungsten carbide resists wear for extended life. On high-volume jobs spraying abrasive materials like primers or textured coatings, carbide tips outlast standard tips 3-to-1 or better.
Q: What’s the real coverage width with the 12-14 inch fan?
A: 12 to 14 inches at proper spray distance. Hold the gun 12 inches from the surface for optimal pattern. Closer narrows the fan; farther creates orange peel texture.
Q: Can this tip handle stains and clear finishes too?
A: Yes — it’s rated for stains, polyurethanes, and lacquers. The 0.019 orifice might be overkill for thin stains on detailed work, but it handles deck stains and sealers efficiently.
Ready to Get Started?
Our paint & finish specialists can help you find the right Graco products for your project.
More from Graco
Explore All Graco Products
We carry Graco across all 11 Montana and Idaho stores.
