Graco Airless Spray Tip 417

The Graco Airless Spray Tip 417 delivers an 8 to 10-inch fan width with a 0.017-inch orifice, making it the workhorse size for residential and light commercial painting. At 2000 PSI standard operation, it flows approximately 0.31 gallons per minute — fast enough for production work without overwhelming control on trim and detail areas.

Professional contractors rate this tip at 4.55 stars across over 2,000 reviews on Amazon and Home Depot. The TrueAirless variant with SoftSpray Technology delivers a softer spray finish with greater control and less overspray. For Montana contractors dealing with short construction seasons and varied coating requirements, the 417 handles everything from primer base coats to finish applications.

Technical Performance and Variants

The tungsten carbide construction handles pressures up to 3000-4050 PSI in standard models. That durability matters when spraying thick primers or pushing through long hose runs on commercial jobs. The XHD variant cranks that up to 7250 PSI for contractors running heavy-duty rigs on industrial coatings.

Specification	Value	Source
Orifice Size	0.017 inch (0.432 mm)	Manufacturer
Fan Width at 12”	8-10 inches	Manufacturer
Flow Rate at 2000 PSI	0.31 GPM	Manufacturer
Max Pressure (Standard)	3000-4050 PSI	Manufacturer
Max Pressure (XHD)	7250 PSI	Manufacturer

The professional variants each serve specific needs. The TrueAirless 417 with SoftSpray Technology reduces overspray — valuable when spraying near finished surfaces or in occupied spaces. The RAC X Low Pressure 417 operates at 50% less pressure for thin to medium-viscosity coatings like stains and sealers. The Fine Finish variant provides soft atomization for lacquer, varnish, and urethane applications.

Color-coded handles eliminate guesswork — black for TrueAirless/RAC IV, blue for RAC X, neon for LP variants. Smart design for crews running multiple tips on different materials throughout the day.

Reverse-A-Clean Technology and Material Compatibility

The Reverse-A-Clean (RAC) feature clears clogs by twisting the tip and spraying in reverse. No tools. No disassembly. Just twist to the clean position during use. Users consistently praise the ease of clearing clogs, though occasional paint clogs still occur if material isn’t properly strained.

Compatible materials span latex paints, primers, solid stains, enamels, varnishes, and polyurethanes. The tip handles medium viscosity coatings — thick enough for one-coat coverage, thin enough to atomize properly. Suitable surfaces include interior and exterior walls, doors, fences, decks, siding, trim, and cabinets.

Montana’s temperature swings demand versatility. This tip transitions from spraying thick exterior primer in morning cold to flowing interior latex when afternoon temps climb. The pre-installed OneSeal prevents leaks and simplifies tip changes — critical when switching between materials throughout the day.

Installation and Maintenance

Hand-tightening eliminates the need for tools. Insert the tip into the guard, screw it hand-tight onto the spray gun, and align the arrow in the spraying direction. The simplicity reduces downtime between tip changes.

Maintenance follows standard practice — flush with water or solvent after each use and store in a clean, dry place or tip storage solution. Replace the Single Seal when changing tips or if leaks develop. Proper storage prevents the dried paint buildup that kills tips prematurely.

The 417 fits Graco Magnum series (X5, X7), ProX series (ProX17, ProX19, ProX21), and Ultra/Ultra Max sprayers. Compatible guards include RAC IV Hand-Tight Guard, RAC V Guard, and RAC X Guard for LP/FFLP variants. Graco tip extensions (10, 20, 30 inch) and spray shields work with the system.

Frequently Asked Questions

What’s the difference between the TrueAirless 417 and standard RAC IV 417? The TrueAirless variant includes SoftSpray Technology that delivers a softer spray pattern for better control and reduced overspray. The standard RAC IV focuses on durability and basic reverse-clean functionality. Choose TrueAirless for finish work near completed surfaces.

Can this tip handle thick elastomeric coatings? The 417 is designed for medium viscosity coatings. Elastomerics typically require larger orifices (0.021” or bigger). The XHD variant’s 7250 PSI capability helps with thicker materials, but elastomerics still push the limits of a 0.017” orifice.

How long do these tips typically last? Graco provides a 1-year limited warranty. Tungsten carbide construction delivers longer life than cheaper tips. Professional reviews highlight durability as a key strength. Actual lifespan depends on material abrasiveness and maintenance habits.

What causes overspray issues with this tip? Users report overspray when pressure is set too high. Start low and increase pressure until you achieve proper atomization. The Low Pressure variant operates at 50% less pressure specifically to reduce overspray on fine finish work.

Which guard should I use for different applications? Standard applications use the RAC IV Hand-Tight Guard. The RAC X Guard pairs with LP (Low Pressure) and FFLP (Fine Finish Low Pressure) variants. Match the guard to your tip variant for proper seating and performance.