Alliance Door Products’ ShipLap Collection Charcoal delivers prefinished solid pine planks with self-spacing design that installs approximately 3x faster than salvaged wood. The 1×6 nominal boards create authentic rough-sawn texture at approximately half the cost of reclaimed lumber.
Installation Efficiency and Material Specs
The built-in 1/8-inch nickel-gap design eliminates manual spacing, while uniform sizing cuts installation time to roughly a third of what salvaged wood requires. The prefinished surface means no on-site staining or painting — eliminating mess, odors, and drying time.
| Specification | Value | Source |
|---|---|---|
| Material | Solid #3 Pine (Hand-selected) | manufacturer |
| Dimensions | 1 in. x 6 in. (Nominal) | manufacturer |
| Lengths Available | 12 ft. and 16 ft. | manufacturer |
| Coverage per Board | 6.59 sq. ft. (16 ft.) / 4.94 sq. ft. (12 ft.) | manufacturer |
| Edge Profile | Square-edge shiplap | manufacturer |
| Texture | Rough-sawn / Rough-hewn textured surface | manufacturer |
| Gap Spacing | 1/8-inch self-spacing (Nickel-Gap) | manufacturer |
Contractors can install directly to wall studs or over existing surfaces with proper fastening, though Alliance recommends 48-72 hours of acclimation before installation. Fastening happens through the tongue or face with finish nails — face-nailing creates a rustic look some clients prefer.
Cost-Performance Analysis
The product costs approximately half what authentic salvaged wood runs. That’s significant savings before factoring in the labor reduction. Compared to paint, it’s more expensive and labor-intensive but delivers what customers describe as a much higher ‘wow factor’ with tangible texture.
Against MDF shiplap alternatives, the solid pine offers natural grain and texture that engineered products can’t match. The solid wood construction provides warmth and durability missing from composite options.
Application Versatility
The planks work for interior walls, ceilings, and wainscoting applications. Installation runs either horizontally or vertically depending on design goals. Near fireplaces, contractors must check local fire codes for required clearances.
Commercial applications include office lobbies, retail storefronts, and restaurants, fitting design styles from Modern Farmhouse to Industrial, Rustic, and Traditional.
Alliance offers matching trim in 1×4×12 ft. and 1×8×16 ft. solid pine boards in Charcoal finish. Touch-up kits in matching Charcoal handle nail holes and cut ends.
Professional Assessment
Professional installers specifically note the self-spacing feature significantly reduces labor time versus traditional shiplap. Customers mention the ‘wow factor’ and beautiful charcoal shades that create a moody, modern aesthetic.
Some homeowners find it pricey compared to basic paint or MDF, but acknowledge the premium look and finish quality. For Montana contractors dealing with rustic architectural styles, the authentic look replicates vintage reclaimed shiplap without hazards like old nails or lead paint.
The solid pine construction handles Montana’s dry interior climates well. The eco-friendly, low-maintenance finishes are designed for interior longevity. While the manufacturer lists compliance with ASTM requirements for surface burning in public assembly areas, specific fire ratings aren’t provided.
Frequently Asked Questions
Q: How much faster does this install compared to regular shiplap?
The uniform sizing and self-spacing design makes it approximately 3x faster to install than salvaged wood. The built-in 1/8-inch nickel-gap eliminates the need for manual spacing between boards.
Q: Can this go in a bathroom or kitchen?
Alliance doesn’t publish moisture resistance ratings for this product. The manufacturer lists interior walls, ceilings, and wainscoting as applications but doesn’t include wet areas. For bathrooms or kitchens, verify moisture specifications with the manufacturer first.
Q: What’s included with purchase?
Prefinished shiplap planks are sold by the piece or in bulk packs. Matching 1×4 and 1×8 trim boards and Charcoal touch-up kits are optional purchases. Installation guides are available through digital resources.
Q: Do I need to finish the boards after installation?
No. The prefinished surface eliminates on-site staining, painting, and associated mess and odors. The eco-friendly finishes are designed for interior longevity without additional treatment.
Ready to Get Started?
Our doors & millwork specialists can help you find the right Alliance Door Products products for your project.
More from Alliance Door Products
Explore All Alliance Door Products Products
We carry Alliance Door Products across all 11 Montana and Idaho stores.
