The Alliance Door Products ShipLap Collection delivers prefinished solid pine planking that installs up to 3x faster than salvaged wood. This 1x6 nominal solid #3 pine product comes factory-finished in Cloud (Soft White/Whitewashed) with a textured surface and self-spacing 1/8 inch nickel-gap design.
Installation Speed and Coverage Specs
Installation runs up to 3x faster than salvaged wood thanks to the self-spacing design and uniform dimensions. Contractors can choose between blind-nailing through the tongue or face-nailing for a rustic look.
The coverage math is straightforward:
| Board Length | Coverage per Board | Material |
|---|---|---|
| 12 ft | ~4.94 sq ft | Solid #3 Pine |
| 16 ft | ~6.59 sq ft | Solid #3 Pine |
Alliance recommends ordering 10% extra for waste and selection. This isn’t just standard overage advice — natural wood variation requires some board selection during installation.
Prefinished Surface Advantages
The factory-applied finish eliminates jobsite mess completely. Each board arrives with a textured, low-VOC water-based finish in Cloud (Soft White/Whitewashed) coloring. Compared to standard shiplap, this pre-finished surface avoids the mess of on-site staining or painting.
The product suits climate-controlled interior environments only — not for exterior use or wet areas like showers. For Montana’s dry indoor climate, solid pine performs better than composite materials that can show wear differently at low humidity levels.
The manufacturer provides a 30-year limited coating warranty on finish durability plus a limited warranty against material defects like rot or structural issues. That’s confidence in the factory finish holding up long-term.
Who Should Consider This Product
Applications span residential accent walls, ceilings, wainscoting, and kitchen backsplashes to commercial lobbies, offices, retail displays, and restaurant interiors. Positive feedback centers on the authentic wood look and ease of installation from the prefinished surface and built-in gap.
Compared to reclaimed wood, this product offers lower cost, no hazardous residues like lead paint, uniform dimensions, and faster installation. The trade-off comes down to authenticity versus efficiency. Reclaimed wood brings genuine history. This product brings predictable quality and labor savings.
Matching trim boards come in 1x4 x 12 ft and 1x8 x 16 ft sizes, with touch-up kits available specifically for the Cloud finish. Smart planning means ordering trim and touch-up materials with the initial shipment.
FAQ
What’s the actual installation time savings compared to raw shiplap?
Up to 3x faster than salvaged wood installation. The prefinished surface eliminates staining/painting time, while the self-spacing design removes gap measurement work.
Can this product work in bathrooms or covered porches?
No. The product is not suitable for exterior use or wet areas like showers — interior climate-controlled environments only.
What causes the natural variation mentioned in reviews?
Solid #3 Pine construction means natural wood grain and color variations. That’s why Alliance recommends ordering 10% extra — for waste and board selection during installation.
How does the warranty coverage work?
The manufacturer provides a 30-year limited coating warranty on finish durability and a limited warranty against material defects. Specific terms are available through Alliance Door Products representatives.
Ready to Get Started?
Our doors & millwork specialists can help you find the right Alliance Door Products products for your project.
More from Alliance Door Products
Explore All Alliance Door Products Products
We carry Alliance Door Products across all 11 Montana and Idaho stores.
