The Cinch/Wild Hog Rail Kit delivers a pre-assembled steel railing system with factory-installed brackets that eliminates measuring and drilling while ensuring code-compliant spacing. Contractors who’ve fought with traditional rail systems appreciate a kit that arrives ready to mount. At 6 feet nominal length with 1-inch thick rails, this system targets deck and porch installations where speed matters as much as strength.
The kit shines in residential deck railing upgrades, porch and patio systems, stair rail installations (both indoor and outdoor), and commercial balcony projects. The 15-year residential warranty (10-year commercial) protects against cracking, blistering, peeling, corrosion, and abnormal fading — but requires registration within 30 days of purchase and covers labor for only the first 2 years.
Installation Efficiency and Wild Hog Panel Integration
The complete kit includes all necessary mounting hardware and instructions for a DIY-friendly installation. No hunting for the right fasteners at the bottom of your truck. Installation follows a straightforward sequence: install post brackets at correct heights, cut rails to length if necessary, insert EPDM weather strips into top and bottom rails, secure side tracks to posts and insert Wild Hog panel, then mount rails and secure with provided fasteners.
The kit includes 50 Hog Tusks specifically for 6-gauge panel attachment, plus side tracks measuring 3/8” x 34” sized for Wild Hog panels. Those EPDM weather strips aren’t just packing material — they provide moisture protection and vibration damping, preventing the metal-on-metal rattle that drives homeowners crazy on windy days.
Some kits provide 8-foot sections that require cutting to length, so verify what you’re getting before ordering. The included hardware covers screws, brackets, and Hog Tusks (for 6-gauge panels only). If you’re running thicker gauge panels, you’ll need different attachment hardware.
Heavy-Gauge Steel Construction and Finish Durability
Pre-galvanized heavy-gauge steel forms the foundation, protected by zinc phosphate base coating and finished with a textured Satin Black powder-coat. That’s three layers of corrosion protection before Montana weather even gets a shot at it. The textured finish resists fingerprints, dirt, and minor blemishes — practical for high-traffic areas where every handprint shows on glossy surfaces.
The bottom rail features integrated weep holes, critical for preventing water accumulation that leads to rust from the inside out. Concealed fasteners and hardware create a clean aesthetic while protecting connection points from moisture infiltration.
| Specification | Value |
|---|---|
| Material | Pre-galvanized heavy-gauge steel |
| Base Protection | Zinc phosphate coating |
| Finish | Textured Satin Black powder-coat |
| Rail Dimensions | 1” thick x 6’ nominal length |
| Side Tracks | 3/8” x 34” (set of 2) |
| Weather Sealing | 2 x EPDM strips (6 ft or 8 ft) |
Compared to pressure-treated wood framing, the system offers lower maintenance with no staining or painting required, plus higher durability against rot. When stacked against generic metal rail systems, it’s specifically tailored for Wild Hog wire panels, ensuring perfect fit and consistent finish. The trade-offs? Fixed color (Satin Black only) and requires specific panel compatibility.
FAQ
Q: Does the kit work with panels other than Wild Hog brand? A: The system is designed for seamless integration with Wild Hog panels, but the included Hog Tusks work specifically with 6-gauge panels only. Other gauge panels require different attachment hardware not included in the kit.
Q: What’s actually included in the box? A: The kit contains: 1 top rail (1” x 6’), 1 bottom rail (1” x 6’) with weep holes, 2 side tracks (3/8” x 34”), 2 EPDM weather strips, 50 Hog Tusks for 6-gauge panel attachment, installation hardware (fasteners/brackets), and an installation instruction manual.
Q: How does the warranty registration work? A: The 15-year residential warranty (10-year commercial) requires registration within 30 days of purchase. It’s non-transferable and covers labor for only the first 2 years. Coverage includes protection against cracking, blistering, peeling, corrosion, and abnormal fading.
Q: Can I get this in colors other than black? A: No. The system comes in Satin Black only, designed to match Cinch posts and other Cinch Satin Black powder-coat finish products.
Q: Do the rails come pre-cut to 6 feet exactly? A: Some kits provide 8-foot sections that require cutting to length. Check your specific kit before installation to determine if cutting is needed.
Ready to Get Started?
Our decking & railing specialists can help you find the right Cinch products for your project.
More from Cinch
Explore All Cinch Products
We carry Cinch across all 11 Montana and Idaho stores.
