Cinch rail kits transform Wild Hog wire panels into code-compliant railing systems with pre-assembled components that eliminate measuring and drilling during installation. Skip the custom fabrication headaches. The complete kit includes all necessary mounting hardware and instructions for a DIY-friendly installation.
The genius here? Factory-installed brackets ensure code-compliant spacing without field modifications. That’s hours saved on every deck project. The pre-galvanized heavy-gauge steel construction with textured Satin Black powder-coat finish matches Cinch posts exactly. No color mismatch between components.
Rail Kit Components and Integration
The 6’ kit (SKU 53149) includes top and bottom rails (1” x 6’), with the bottom rail featuring integrated weep holes for drainage. Two side tracks (3/8” x 34”) accommodate standard Wild Hog deck panels, plus two EPDM weather strips, 50 Hog Tusks for 6-gauge panel attachment, and all installation hardware.
Those weep holes matter in Montana. Water trapped in rail systems during freeze-thaw cycles destroys connections faster than anything else. The EPDM strips provide moisture protection and vibration damping — critical when temperature swings make metal components expand and contract daily.
The textured finish resists fingerprints, dirt, and minor blemishes. Practical benefit: less visible construction grime during installation, fewer callbacks about cosmetic issues after the job’s done.
| Component | Specification | Function |
|---|---|---|
| Rails | 1” thick x 6’ or 8’ lengths | Top/bottom horizontal support |
| Side Tracks | 3/8” x 34” | Wild Hog panel channels |
| EPDM Strips | 6’ or 8’ lengths | Weather seal and vibration damping |
| Hog Tusks | 50 included | 6-gauge panel fasteners |
| Finish | Textured Satin Black powder coat | Matches Cinch posts, hides wear |
Installation Efficiency and Contractor Benefits
The real value shows in labor savings. Concealed fasteners and hardware provide a clean aesthetic without the custom drilling typical railing installs demand. Specifically tailored for Wild Hog wire panels, ensuring a perfect fit and consistent finish compared to generic rail systems.
Key installation steps: Install post brackets at correct heights, cut rails to length if necessary (some kits provide 8ft sections), insert EPDM weather strips into top and bottom rails, secure side tracks to posts and insert Wild Hog panel, then mount rails and secure with provided fasteners. The kit eliminates the measuring-drilling-test fitting cycle that eats up afternoon after afternoon on custom jobs.
Pre-attached level brackets save installation time — another detail that matters when you’re racing Montana’s short construction season. ADA-compliant railing solutions mean no guesswork on commercial projects about meeting code requirements.
Durability Specs and Warranty Coverage
The warranty structure reflects confidence in the coating system: 15-year limited residential warranty, 10-year limited commercial warranty. Coverage protects against cracking, blistering, peeling, corrosion, and abnormal fading. Must be registered within 30 days of purchase; non-transferable; labor covered for first 2 years.
That labor coverage matters. Most warranties make you eat the reinstall cost when their product fails. Two years of labor coverage means Cinch stands behind their installation system, not just the raw materials.
The zinc phosphate base treatment plus powder coating provides superior corrosion resistance. Standard powder coat over raw steel starts failing at cut ends and drill holes within five years. The zinc phosphate pre-treatment creates a chemical bond that survives Montana’s temperature extremes.
FAQ
What gauge Wild Hog panels work with these rail kits? Compatible with standard Wild Hog deck panels, with 6-gauge recommended for the included Hog Tusks. The 50 included Tusks are specifically sized for 6-gauge wire attachment.
Is different hardware needed for 8’ vs 6’ kits? No. Both length options include the same hardware package and installation approach. The only difference is rail and weather strip length.
Can these work with non-Cinch posts? Designed for Cinch posts and matching satin black hardware systems. While mechanically possible to adapt to other posts, you’ll lose the color match and potentially compromise the warranty.
What’s included for panel attachment? 50 Hog Tusks for 6-gauge panel attachment, plus all necessary mounting hardware including screws and brackets. Everything needed for a complete installation comes in the box.
Where are installation instructions available? Manual available at https://pdf.lowes.com/productdocuments/49452c00-b2f3-4b0b-9ffa-d19b2a653168/64772167.pdf
Ready to Get Started?
Our decking & railing specialists can help you find the right Cinch products for your project.
More from Cinch
Explore All Cinch Products
We carry Cinch across all 11 Montana and Idaho stores.
