Worth it for cabinet installers who need reliable fasteners for Blum hardware. The #8 x 3/4” screw combines Type 17 auger point design with case-hardened steel construction, giving you the holding power that actually matters in cabinet work. At 4.5 to 4.8 stars across industrial vendors, contractors trust these screws.
Skip them if you’re just hanging a picture frame. These are cabinet-grade fasteners engineered for professional installations.
Technical Specifications That Matter
The Type 17 auger point changes the installation game. That aggressive tip bites into wood fibers and starts threading without wandering across the surface. Less splitting means fewer ruined face frames.
| Specification | Value |
|---|---|
| Gauge | #8 |
| Length | 3/4” (approx 19 mm) |
| Thread diameter | 4.3 mm |
| Thread length | 16.8 mm |
| Overall length | 20.5 mm |
| Head type | Truss Head / Low-profile Washer Head |
| Drive type | Phillips #2 |
| Material | Case-hardened Steel |
| Point type | Type 17 Auger Point |
Case-hardened steel handles Montana’s humidity swings better than standard screws. Cabinet shops run humidifiers in winter when wood stoves dry the air to 15% humidity, then deal with 60% humidity in summer. That moisture cycling corrodes cheap screws.
The deep/coarse threads grip harder in both softwoods and hardwoods. You’re not just threading into surface fibers — those threads bite deep enough to resist pull-out forces from heavy doors swinging thousands of times.
Installation Reality
The low-profile truss head sits flush without digging a crater. That broad bearing surface distributes load across more wood fibers. Standard pan heads concentrate force and can compress softer woods like pine.
Type 17 auger point facilitates self-drilling/starting — marketing speak for “you probably won’t need a pilot hole.” In hardwoods like oak or maple, drill pilot holes anyway. The auger point helps, but forcing screws splits face frames.
Phillips #2 drive works with every driver bit in your pouch. Nothing fancy. Just make sure your bit isn’t worn — cam-out ruins screw heads fast when you’re driving dozens per cabinet.
Real-World Applications
These screws work for mounting Blum Compact face-frame hinges, mounting cabinet drawer slides, and general cabinet construction using face-frames. They’re not just “Blum screws” — they’re cabinet screws that happen to match Blum’s spec requirements perfectly.
Available in zinc and nickel-plated finishes. Zinc costs less. Nickel looks better on exposed hardware. Both resist corrosion adequately for indoor cabinet use.
Sold in boxes of 100 or individually. Buy the box. Individual screws cost triple per piece, and you’ll use them all eventually.
Market Validation
804 reviews on Wurth Machinery average 4.7 stars. That’s serious volume from professional users. Wurth doesn’t sell to weekend warriors — their customers install cabinets daily.
Rockler Centerline makes a “#8 x 3/4” Low-Profile Washer-Head Phillips Screws” as a direct compatible alternative. Same specs, different brand. Swisco sells generic “#8 x 3/4” Pan/Flat Head Phillips Screws” without specific Blum branding. The generics work but lack the Type 17 point refinement.
Pricing varies wildly between vendors. Shop around. These are commodity fasteners with healthy markup — no reason to overpay.
Bottom Line
Blum’s #8 x 3/4” screws deliver what cabinet installers need: consistent quality, proper thread engagement, and heads that don’t strip. The Type 17 auger point genuinely reduces splitting in face frames. Case-hardened steel survives Montana’s moisture swings.
Not revolutionary. Not proprietary. Just well-engineered screws that do their job without drama. Sometimes that’s exactly what you need.
Frequently Asked Questions
Are pilot holes needed with these Type 17 auger point screws?
The auger point reduces splitting risk, but pilot holes aren’t explicitly specified. In softwoods like pine or fir, you can usually skip pilots. In hardwoods or near edges, drill pilots to prevent splits. The auger helps but won’t work miracles in dense wood.
What’s the difference between the zinc and nickel-plated finishes?
Both finishes are available. Zinc costs less and provides adequate corrosion resistance for interior cabinets. Nickel looks more refined and matches stainless hardware better. Neither affects holding power.
Will these screws work with non-Blum hardware?
While designed for Blum Compact face-frame hinges and drawer slides, they work for general cabinet construction using face-frames. Any application needing a #8 x 3/4” cabinet screw benefits from the Type 17 point and case-hardened construction.
How do these compare to drywall screws for cabinet work?
Don’t use drywall screws for cabinets. These feature deep/coarse threads for superior holding power in wood, plus case-hardened steel that resists shearing under load. Drywall screws have fine threads and brittle steel — wrong tool for the job.
Why do professional reviews rate these so highly?
Ratings from 4.5 to 4.8 stars across industrial vendors, with 804 reviews on Wurth Machinery alone. Pros value consistency. These screws drive predictably, hold reliably, and don’t surprise you with stripped heads or split wood. Boring reliability earns stars.
Ready to Get Started?
Our cabinets specialists can help you find the right Blum products for your project.
More from Blum
Explore All Blum Products
We carry Blum across all 11 Montana and Idaho stores.
