Woodford Wall Hydrants and Freezeless Faucets for Montana Contractors

Woodford makes freezeless hydrants and wall faucets with specific model configurations for different wall thicknesses and applications. Their 8-inch wall hydrant lineup serves Montana contractors who need reliable cold-weather outdoor water access.

Core Models and Their Applications

Model 17 delivers the basics: anti-siphon protection, 125 PSI pressure rating, and comes in 8”, 10”, and 12” lengths. The freeze less model 17 uses 1/2 inch MIP to sweat connections with anti-siphon brass construction. This is your workhorse model for standard residential installations.

Model 22 brings hot and cold capability to the mix. The 22PX models feature anti-freeze and anti-rupture technology, connect to PEX piping, and handle both hot and cold water lines. Perfect when you need tempered water at an outdoor station.

Model 67 steps up the backflow protection with a double-check preventer using Nidel 50HA. Higher flow rates make this the commercial choice when code requires redundant backflow protection.

Model 65P-8 comes in standard and rough brass finish options, featuring automatic draining and vacuum breaker protection with 3/4 inch FPT inlet. The larger inlet suits commercial applications or high-flow residential needs.

Model 70 serves exposed commercial installations with 8-inch wall thickness compatibility. Built heavier for abuse resistance in public or high-traffic areas.

Cold-Weather Engineering That Matters

Every model features automatic draining when the handle turns off. No manual drain valve to forget. No trapped water to freeze. The mechanism works reliably in sub-zero conditions.

All models are designed specifically for 8-inch wall thickness — matching typical Montana construction where insulation and sheathing create thicker walls than warmer climates. Die-cast aluminum and brass construction handles temperature swings without cracking.

Inlet options cover every connection type: 3/4 inch FPT, 1/2 inch MPT, 1/2 inch sweat, 1 inch P-inlet, and 1/2 inch PEX. No adapters needed. Pick the model that matches your rough-in.

Specification	Value
Wall Thickness	8 inches
Pressure Rating	125 PSI (Model 17)
Inlet Sizes	1/2”, 3/4”, 1”
Connection Types	FPT, MPT, Sweat, PEX, P-inlet

Professional contractors praise Woodford’s time-tested functionality, ease of repair from the top without removing the unit, and reliable performance in sub-zero temperatures. That top-access repair feature saves hours when a seal needs replacing — no digging, no wall damage.

Yard Hydrant Options

Woodford also makes yard hydrants in 5-foot (Y34-5) and 6-foot (Y34-6) depths. These models serve irrigation, farm, or ranch settings where immediate water flow is needed in sub-zero temperatures. Same freezeless operation, same top-access repair design.

The quality shows in the reviews. Ratings range from 4.2 to 5.0 stars across retailers, with Model 17 earning 4.4 stars from 137 reviews at SupplyHouse. Those aren’t homeowner ratings — they’re from contractors who install these day after day.

Skip Woodford if you’re looking for the cheapest option. Generic import hydrants cost half as much. But when callbacks eat your profit and frozen hydrants mean emergency service calls, the math changes. Proper installation and maintenance are critical, and occasional repairs may be necessary. At least with Woodford, those repairs happen from the top without excavation.

FAQ

What wall thickness do Woodford hydrants fit? All models shown are designed for walls 8 inches thick. Typical overall length runs 12-13 inches depending on model and inlet type.

Do these hydrants truly prevent freezing? Yes, through automatic draining when shut off. The freezeless, anti-rupture design prevents damage during freezing conditions. Water drains back below the frost line every time you turn the handle off.

What’s the pressure rating? Model 17 series hydrants are rated for 125 PSI. Check specific model documentation for other series.

Which model offers the best backflow protection? Model 67 includes a Nidel Model 50HA double-check backflow preventer. This exceeds single-check protection on other models.

Can hot water run through these hydrants? Yes, Model 22 handles both hot and cold water. Other models are cold-water only.