The Wiremold C110 is a 9-foot low-voltage cord management kit with precise 9/16” W x 7/16” D channel dimensions designed for contractors who need single-cord concealment along baseboards and walls. At 4.3-4.4 out of 5 stars across retailers, it delivers what most installers need — though the adhesive can damage drywall upon removal and it only holds one thin cable.
Skip this if you’re managing multiple cables or need line-voltage capacity. This kit handles low-voltage only — no romex, no standard electrical cords. It’s built for HDMI, speaker wire, phone lines, data cables, and small extension or lamp cords.
Channel Dimensions and Installation Reality
The C110 gives you three 3-foot PVC sections totaling 9 feet, each measuring 9/16” wide by 7/16” deep. That’s barely enough room for a single thin cable — don’t expect to squeeze two HDMI cables through this channel. Customer reviews confirm it “only holds one thin cable,” which matches the manufacturer’s low-profile design intent.
Installation starts with clean, dry, smooth surfaces only — the peel-and-stick adhesive backing won’t grip textured walls or dusty baseboards. You can cut sections to length with a utility knife or fine-tooth saw, and the included fittings (1 inside elbow, 1 outside elbow, 2 flat elbows, 2 couplings) handle basic routing around corners.
The adhesive creates a semi-permanent installation. Reviews warn that “adhesive can damage drywall upon removal,” so this isn’t a temporary solution. Once it’s up, plan on repainting if you ever take it down.
| Specification | Value |
|---|---|
| Total Length | 9 ft (2.7 m) |
| Channel Size | 9/16” W x 7/16” D |
| Pieces | Three 3-ft sections |
| Material | Durable PVC |
| Voltage Rating | Low-voltage only (not for line voltage) |
| Finish | White, paintable with latex-based paint |
What You Actually Get in the Box
The kit includes everything for a basic single-cable run: 3 x 3-ft PVC channel pieces, 1 inside elbow, 1 outside elbow, 2 flat elbows, and 2 couplings. That’s enough fittings for one or two direction changes — not a complex routing job.
The flat elbows work where the cable needs to turn 90 degrees along the same plane. The inside and outside elbows handle corners where walls meet. The couplings connect sections for longer runs or join cut pieces.
The neutral white finish can be painted with latex-based paint to match your trim or wall color. Most contractors paint these after installation for a cleaner look, especially in finished spaces where the stark white plastic stands out.
Product Identification
The UPC 086678821042 and product number 501301 help you verify you’re getting the genuine C110 kit, not a similar-looking model with different capacity or fittings.
Frequently Asked Questions
Q: Can I use this for standard electrical cords? A: No. This is rated for low-voltage only, not line voltage. Stick to HDMI cables, speaker wires, phone lines, data cables, and small lamp or extension cords. Running standard 120V electrical cords through this channel would violate code.
Q: How much cable can it actually hold? A: Reviews consistently report it “only holds one thin cable.” With internal dimensions of 9/16” wide by 7/16” deep, there’s no room for cable bundles. One HDMI cable or one speaker wire fills the channel.
Q: Will it damage my walls if removed? A: Yes, reviews warn that “adhesive can damage drywall upon removal.” The peel-and-stick backing creates a strong bond that often pulls paint or paper facing when removed. Consider this a permanent installation.
Q: Can I paint it to match my trim? A: Yes, the white PVC accepts latex-based paint. Most contractors paint after installation for better adhesion and appearance. Use the same paint as your trim for the cleanest look.
Q: What warranty does Wiremold provide? A: Wiremold offers a limited warranty against defects in material and workmanship for 1 year from installation or 2 years from purchase, whichever comes first. Standard manufacturer coverage — nothing exceptional.
Ready to Get Started?
Our building materials specialists can help you find the right Wiremold products for your project.
More from Wiremold
Explore All Wiremold Products
We carry Wiremold across all 11 Montana and Idaho stores.
