The Wiremold 90° Flat Elbow B6 transforms surface-mounted wiring at corners without the headaches of cutting and fitting multiple pieces. Built from heavy-duty steel with a scratch-resistant ScuffCoat finish, this fitting creates clean 90-degree transitions on flat surfaces for both 500 and 700 series Wiremold raceways. The dual knockout design means contractors don’t need separate fittings for different raceway series — one part handles both.
At 0.75 inches high and roughly 2 to 2.75 inches wide, the B6 maintains a low profile that doesn’t call attention to itself once installed. With a 4.4-star rating across over 100 reviews from major retailers, contractors trust this fitting for reliable corner transitions. The most common praise centers on easy installation and perfect fit with Wiremold’s raceway systems.
Universal Compatibility Saves Inventory Headaches
The B6’s dual knockout design fits both 500 and 700 series raceways — a detail that matters when you’re managing job site inventory. Instead of stocking separate elbows for each series, contractors carry one part number that works with both systems. The fitting handles THHN/THWN electrical wire, Category 5/6 communication cables, and even NM wire in specific configurations.
UL listing confirms the B6 meets safety standards for NM wire installations in the B Series System. That certification matters for inspections and code compliance. Alternative Wiremold fittings include the B7 for inside corners and B8 for outside corners, but the B6 handles the most common scenario — flat wall turns where conduit changes direction in a single plane.
The compatibility extends beyond just raceway series. Both screw-in and snap-on mounting options give installers flexibility based on the substrate and access. Drywall, concrete block, brick — the mounting system adapts to whatever surface you’re working with.
Installation Specs and Physical Dimensions
Dimensions vary slightly by retailer: Home Depot lists 2.0 inches width while Menards shows 2.75 inches. Depth ranges from 0.5 to 0.656 inches depending on the source. These variations likely reflect measurement methods rather than actual product differences.
| Specification | Value |
|---|---|
| Height | 0.75 inches |
| Width | 2.0-2.75 inches |
| Depth | 0.5-0.656 inches |
| Material | Heavy-duty steel |
| Finish | ScuffCoat (scratch-resistant, paintable) |
| Environment | Indoor use |
| Mounting | Screw-in or Snap-on |
Installation follows standard practice: align the elbow with the raceway run, secure to the surface with screws through mounting holes, feed wires through, then snap the cover onto the base. Oil-based paint works on the ScuffCoat finish when color matching matters.
The indoor-only rating means these fittings stay inside the building envelope. Montana’s temperature swings and moisture would destroy an indoor-rated fitting in short order. For exterior applications or wet locations, different products apply.
Product Quality and Manufacturing Excellence
Product number 501301 reflects consistent manufacturing standards across distribution channels. The dual-series compatibility and proven reliability deliver value for contractors who need dependable corner transitions on every job.
Wiremold leads the wire management category for both residential and commercial markets, manufacturing electrical raceways and conduit systems. Their focus on lean manufacturing through Kaizen methodology shows in consistent product quality. Operating in nearly 180 countries through parent company Legrand, they’ve proven their systems work in diverse building environments.
The B6 exemplifies what contractors want from Wiremold — a fitting that solves a specific problem without creating new ones. The fitting works with basic tools and fits both major raceway series. Sturdy metal construction and the ability to paint-match complete the package.
For Montana contractors running surface-mount wiring in commercial retrofits or residential remodels, the B6 handles the most common transition — that 90-degree turn along a flat wall where appearance matters. The dual-series compatibility alone makes it worth stocking.
Frequently Asked Questions
Q: What size raceways does the Wiremold B6 elbow fit?
The Wiremold B6 90° Flat Elbow features a dual knockout design that fits both 500 and 700 series Wiremold raceways. This eliminates the need to stock separate fittings for different raceway sizes, as one B6 elbow works with both series.
Q: Can I paint the Wiremold B6 to match my wall color?
Yes, the Wiremold B6 comes with a ScuffCoat finish that’s specifically designed to be paintable. Use oil-based paint for best results when matching the fitting to your wall color.
Q: What’s the difference between the B6, B7, and B8 Wiremold elbows?
The Wiremold B6 creates 90-degree turns on flat surfaces, the B7 handles inside corners, and the B8 works for outside corners. The B6 is the most common choice for standard flat wall transitions where the raceway changes direction in a single plane.
Q: What type of wiring can I run through the Wiremold B6?
The Wiremold B6 accommodates THHN/THWN electrical wire, Category 5/6 communication cables, and NM (non-metallic) wire in specific configurations. The fitting is UL listed for use with NM wire in the B Series System.
Q: Is the Wiremold B6 rated for outdoor use?
No, the Wiremold B6 is rated for indoor use only. The fitting’s specifications clearly state it’s designed for interior applications, not exterior or wet locations.
Q: What are the actual dimensions of the Wiremold B6 elbow?
The Wiremold B6 measures 0.75 inches in height, with width ranging from 2.0 to 2.75 inches and depth from 0.5 to 0.656 inches depending on the retailer’s measurement method. The fitting maintains a low profile for unobtrusive surface-mount installations.
Ready to Get Started?
Our building materials specialists can help you find the right Wiremold products for your project.
More from Wiremold
Explore All Wiremold Products
We carry Wiremold across all 11 Montana and Idaho stores.
