Wayne 1/4 HP Submersible Utility Pump

The Wayne 1/4 HP Submersible Utility Pump delivers 3,100 GPH flow rate at 0 ft head — that’s serious water-moving capacity for a quarter-horse pump. This reinforced thermoplastic utility pump features iSwitch automatic sensing technology that activates at 1-3/4 inches water level and shuts off at 1/2 inch, making it ideal for Montana’s spring snowmelt flooding and agricultural drainage needs.

Performance and Applications

At 5 ft head, the EEAUP250 model maintains 2,350 GPH flow rate, dropping to 1,600 GPH at 10 ft head and still pushing 250 GPH at 20 ft head. Those numbers matter when you’re dealing with flooded crawl spaces during rapid snowmelt or trying to clear a basement window well before the next freeze.

The pump excels at multiple Montana-specific applications:

Draining flooded basements and crawl spaces — essential during spring thaw when every contractor’s phone rings non-stop. The oil-free motor makes it safe for emptying stock tanks and aquariums, a genuine consideration for agricultural properties. It also handles window wells, flat roofs, patios, and temporary dewatering of pools and hot tubs.

The compact 6.5” x 6.5” x 12” dimensions (EEAUP250) let it fit into tight spaces where larger pumps won’t go. Self-priming and fully submersible design with top suction that filters debris and minimizes clogging — critical when dealing with silty spring runoff.

Specification	Value
Flow Rate (0 ft head)	3,100 GPH
Flow Rate (5 ft head)	2,350 GPH
Flow Rate (10 ft head)	1,600 GPH
Max Lift Height	Up to 25 feet
Dimensions (EEAUP250)	6.5” x 6.5” x 12”
Auto On Level	1-3/4 inches
Auto Off Level	1/2 inch
Manual Removal	Down to 1/8 inch

Installation and Setup

Installation requirements are straightforward: place the pump on a level surface, attach a standard 3/4-inch garden hose using the included adapter, and plug into a standard 120V GFCI-protected outlet. Using a check valve on the discharge line is highly recommended for automatic models to prevent cycling — backflow from the discharge hose can trigger false starts.

The iSwitch sensor eye needs periodic cleaning to prevent debris buildup. Montana’s silty spring runoff will coat that sensor faster than cleaner water conditions. Keep it clean or the automatic function becomes unreliable.

The kit includes the pump unit, a right-angle 3/4-inch garden hose adapter, and owner’s manual. The pump handles clean freshwater only — not for sewage, salt water, or chemicals.

The Bottom Line

Wayne offers this 1/4 HP pump with a 1-year limited warranty covering defects in manufacturing and materials. The EEAUP250’s automatic sensing removes water hands-free while the TSC130 manual model offers 1,050 GPH at 0 ft head for simpler applications.

For Montana contractors dealing with spring flooding, agricultural water transfer, or emergency dewatering, this pump delivers the flow rate and automatic operation that saves callbacks. The 3,100 GPH capacity handles real water volumes, not just puddles. It outflows Wayne’s 1/6 HP models (around 1,350 GPH) while staying more compact than the 1/2 HP versions that push up to 4,600 GPH.

FAQ

What’s the actual pumping capacity at different heights? The EEAUP250 delivers 3,100 GPH at ground level, 2,350 GPH at 5 feet, 1,600 GPH at 10 feet, 900 GPH at 15 feet, and 250 GPH at 20 feet maximum lift.

Does it work with livestock water tanks? Yes, the oil-free motor design makes it safe for fish and wildlife applications, including transferring water from stock tanks.

What size areas can it handle? It removes water from flooded basements, crawl spaces, window wells, boats, flat roofs, patios, and can temporarily dewater pools and hot tubs.

What’s included with the pump? The package includes the Wayne 1/4 HP Submersible Pump unit, a right-angle 3/4-inch garden hose adapter, and the owner’s manual.

How low will it pump water? The automatic model shuts off at 1/2 inch water depth, but manual operation can remove water down to 1/8 inch.