Typar’s construction tape lineup delivers specialized sealing solutions from basic housewrap seams to award-winning clear flashing technology. The Clear Acrylic Flashing just won the 2025 IBS Most Innovative Product award, solving a real problem contractors face: proving proper fastener placement without removing the flashing.
The lineup spans four distinct product categories, each engineered for specific jobsite challenges. From 0°F application capability to UV resistance up to 9 months, these tapes handle Montana’s temperature swings and extended construction seasons.
Clear Acrylic Flashing: The Game Changer
The transparent film lets inspectors and clients visually verify nail or screw patterns without removing the flashing. No more callbacks because someone questions whether the window was fastened to spec. The premium acrylic adhesive self-seals around fasteners, maintaining the weather barrier even when penetrated.
Available in 4” and 6” widths, the tape meets AAMA 711-22 standards. UV resistance extends to 9 months — critical when Montana projects stretch through multiple seasons. The acrylic chemistry means it bonds in cold conditions, unlike rubber-based tapes that lose grab below freezing.
Contractors need to roll the tape with a J-roller to ensure full adhesion. That’s not a weakness — it’s proper installation technique for any premium flashing tape. The split release liner makes application easier, especially on ladder work.
Temperature Performance Across the Line
Montana’s climate demands tapes that work from summer heat to winter cold. Typar delivers:
| Product | Application Temperature | Service Temperature | Key Advantage |
|---|---|---|---|
| Construction Tape | Down to 0°F (-18°C) | UV and weather-resistant | Pressure-sensitive adhesive maintains grab in cold |
| All-Temperature Flashing | Down to 0°F | Up to 180°F (82°C) | Adheres to wet/damp surfaces |
| Butyl Flashing | Standard temps | Resists temperature fluctuations | Butyl rubber core provides flexibility |
| Clear Acrylic | Can be applied in cold conditions | UV-resistant up to 9 months | Transparent for inspection |
The All-Temperature Flashing’s 180°F upper limit matters when dark siding heats up under Montana’s high-elevation sun. It self-seals around nails and fasteners, maintaining integrity through freeze-thaw cycles.
Product Segmentation and Applications
The line includes Construction Tape, Butyl Flashing, Clear Acrylic Flashing, All-Temperature Flashing, and Flashing Flex. Each fills a specific niche:
Construction Tape comes in 1-7/8” width with 165 ft rolls and 3” width with 55 ft rolls. The pressure-sensitive adhesive delivers aggressive grab for sealing housewrap seams. Easy-tear edge speeds application — no fumbling for a knife while balancing on staging.
Butyl Flashing handles traditional window and door installations in 6” width with 75 ft rolls. The butyl rubber core excels at moisture resistance and UV protection. This is the workhorse for standard flashing applications.
Flashing Flex targets curved windows, flanges, sill plates, corners, and joints. Two-ply high-density polyethylene film with premium butyl adhesive conforms to complex shapes. Testing shows it enhances joint performance by approximately 20%. Available in 6” and 9” widths.
All-Temperature Flashing bridges the gap when conditions get extreme. Synthetic co-polymer adhesive bonds to OSB, plywood, aluminum, and vinyl. VOC-free with lifetime limited warranty. No primer required thanks to split poly backing.
Professional reviews average 5 stars across retailers. Contractors aren’t giving perfect scores to junk. The Construction Tape earned Best of IBS Awards 2025 alongside the Clear Acrylic innovation. When multiple products from one line win industry awards, the engineering speaks for itself.
Typar uses spunbond polypropylene filament fibers for extreme ruggedness. Third-party testing confirms superior surfactant resistance compared to competitors. Surfactants in soaps, stucco, and siding can break down inferior tapes — Typar’s chemistry resists degradation.
For Montana contractors dealing with -30°F winters, 100°F+ summer heat, and UV exposure at elevation, this lineup addresses real jobsite problems. The Clear Acrylic alone justifies stocking Typar products — transparent verification saves callbacks and satisfies increasingly strict window installation specs. Add the proven cold-weather performance and extended UV resistance, and these tapes earn their shelf space.
Frequently Asked Questions
Q: How does Typar tape compare to Tyvek tape for housewrap seaming?
Typar demonstrates four times stronger tear resistance than Tyvek and provides 50% more UV protection (180 days versus 120 days). Both seal housewrap seams effectively, but Typar’s superior tear strength matters during installation when crews are pulling and positioning long runs. Tyvek is often used for its breathability and moisture vapor transmission properties, though that applies more to the housewrap than the seaming tape.
Q: Can I use the Clear Acrylic Flashing on all window types?
The Clear Acrylic Flashing works particularly well for flanged window installations where fastener placement verification matters most. It’s designed for precise window and door installations where manufacturer specs require specific nailing patterns. The transparency adds value anywhere inspection or warranty compliance depends on proving proper fastening.
Q: What’s the real-world temperature range for applying these tapes in Montana?
Construction Tape applies down to 0°F (-18°C), as does the All-Temperature Flashing. That covers most Montana construction season work. The Clear Acrylic can be applied in cold conditions though specific temperature isn’t stated. For comparison, many competitive tapes won’t stick below 40°F. The All-Temperature product remains thermally stable up to 180°F.
Q: Do these tapes need primer on OSB or plywood sheathing?
The All-Temperature Flashing requires no primer thanks to its split poly backing. Its synthetic co-polymer adhesive bonds directly to OSB, plywood, aluminum, and vinyl. The Construction Tape and Clear Acrylic also feature aggressive pressure-sensitive adhesives designed for direct application. Proper surface prep matters more than primer — clean, dry surfaces ensure best adhesion.
Q: How long can these tapes be exposed before siding installation?
Clear Acrylic Flashing resists UV for up to 9 months. All-Temperature Flashing handles UV exposure for up to six months. The general Typar platform provides 180 days of UV protection. These extended exposure ratings matter in Montana where projects can span multiple seasons or where log home construction requires long curing periods before final siding.
Ready to Get Started?
Our building materials specialists can help you find the right Typar products for your project.
More from Typar
Explore All Typar Products
We carry Typar across all 11 Montana and Idaho stores.
