Leviton RESI Toggle Switch 15A White 10-Pack

Quickwire terminals save contractors real time on bulk residential installations. Push in #14 AWG solid copper, done. No wire wrapping, no screwdriver fatigue after the 50th switch of the day. At 15 Amp, 120V/125V AC rating with 1/2 HP motor capacity, these handle standard residential loads without breaking a sweat.

The impact-resistant thermoplastic nylon body matters when your apprentice inevitably overtorques the mounting screws. Silver-alloy contacts won’t corrode like cheaper alternatives after years of Montana’s temperature swings. The 4.8/5 rating from 1079 reviews tells you contractors keep buying these because they work.

Installation Speed That Actually Matters

Quickwire Push-In terminals accept #14 AWG solid copper only — that’s your standard 15-amp circuit wire. Strip, push, move on. No looping wire around screws, no checking if it’s clockwise. The time savings compound when you’re roughing in a whole house.

For #12 AWG or stranded wire, you’ve still got traditional side terminals with triple-combination screws (Phillips, Slotted, Robertson). Robertson drive on an American switch — someone was thinking. Your Canadian electricians won’t need to switch bits.

Captive mounting screws stay put while you’re juggling wires in a crowded box. Break-off plaster ears for flush alignment mean less fiddling with shims to get switches sitting straight.

Specification	Value
Amperage	15 Amp
Voltage	120V/125V AC
Wiring Options	Quickwire Push-In (#14 AWG solid) Side-Wired (Up to #12 AWG)
Motor Load	1/2 HP at 120V AC
Dielectric Voltage	Withstands 1500V for 1 minute
Insulation Resistance	100 MΩ

Built for Real Job Sites

Impact-resistant thermoplastic nylon body takes abuse without cracking. Drop it from a ladder, step on it, let it bounce around in your tool bag — it’ll still install clean. Steel mounting strap won’t bend when you’re wrestling with old work boxes.

AC Quiet Switch technology eliminates that sharp click traditional switches make. Homeowners notice quiet operation, especially in bedrooms. UL Listed (UL 20), CSA Certified (C22.2 No. 111), and NOM Certified cover your code compliance across North America. Meets NEMA WD-1 and WD-6 standards.

The 10-pack format makes sense for production builders and remodelers. Buy once, stock your truck, stop making hardware store runs mid-job. Common pros from reviews: quiet toggle action, easy Quickwire installation, good value in bulk, sturdy build.

Montana Contractors: Why These Matter

Temperature swings from -30°F to 90°F test every component in a house. Silver-alloy contacts resist the corrosion that kills cheaper switches after a few freeze-thaw cycles. 100 MΩ insulation resistance means moisture infiltration won’t create phantom circuits.

The bulk pack suits Montana’s residential boom. Whether you’re wiring tract homes in Kalispell or custom builds in Whitefish, having 10 switches ready beats piece-buying. Suitable for new construction, retrofit/repair, and DIY upgrades.

2-Year Limited Warranty from Leviton Manufacturing Co., Inc. — though properly installed switches last decades. Warranty voids for improper installation, overloading, or misuse, standard stuff.

FAQ

Can these switches handle LED loads? Yes. Compatible loads include LED, CFL, incandescent, halogen, fluorescent, and resistive.

What special wire does the Quickwire terminal require? Quickwire only accepts #14 AWG solid copper wire. For anything else, use the traditional screw terminals.

What’s the actual installation time savings? Reviews specifically praise “easy to install using Quickwire”. Figure 30-50% faster than wrapping screws once you get the rhythm.

Are these suitable for commercial applications? These are residential grade. Internal alternatives include Leviton Commercial-Grade Toggle Switch for high-traffic or industrial use.

What size electrical box works with these switches? Standard single-gang electrical box, either deep or shallow. Dimensions are 4.19” H x 1.63” W x 1.69” D.