The Titen Turbo delivers what contractors actually care about — easier driving without sacrificing holding strength. The torque-reduction channel (Turbo technology) traps dust to prevent binding/stripping, solving the single biggest frustration with masonry screws. Users praise the reduced effort required to drive the screws and the fact that they are less prone to snapping than competitors.
This masonry screw handles everyday fastening jobs where concrete meets construction. Electrical: Mounting conduit, switch boxes, and electrical boxes. General: Installing window frames and door thresholds. Light Duty: Mounting handrails, signage, and basement furring strips. Storage: Attaching shelf brackets to block or concrete walls. At 4.1 / 5 stars (Home Depot), contractors trust it for reliable performance.
Technical Specifications
| Specification | Value |
|---|---|
| Diameter | 1/4 inch |
| Length | 2-1/4 inches |
| Head Type | Hex Head (5/16” Hex Nut Driver) |
| Drill Bit Size | 3/16 inch ANSI Masonry Bit |
| Material | Heat-treated Carbon Steel |
| Coating | Blue Zinc with Ceramic Finish (Climaseal Blue equivalent) |
| Min Embedment | 1 inch |
| Max Fixture Thickness | 1-1/4 inches |
The dust-clearing channel technology sets this apart from standard masonry screws. Titen Turbo includes a dust-clearing channel which makes it easier to drive manually or with less powerful tools compared to standard Tapcon screws. That channel does more than marketing suggests — it prevents the binding that snaps screw heads when you’re halfway through a mounting bracket.
Material Compatibility and Applications
These screws work across the full range of masonry substrates contractors encounter. Normal-weight concrete, Lightweight concrete, Hollow CMU (Block), Grout-filled CMU, Solid brick — basically everything except steel.
The Blue coating provides corrosion resistance for dry/interior environments. Don’t use these outdoors or in wet basements. The blue zinc ceramic won’t hold up to Montana’s freeze-thaw cycles or persistent moisture.
Serrated leading thread for easier cutting into masonry/concrete combines with a Pointed tip for precise starts and easy wood-to-concrete installation. The serrations bite into concrete faster than smooth threads, reducing the torque needed right from the start.
Installation Requirements
Clean installation matters with any masonry fastener. 1. Drill the hole. 2. Clean out dust with a brush or air. 3. Drive the screw through the fixture until seated. Avoid over-tightening.
Some users recommend using a fresh 3/16 bit to ensure proper fit. Worn bits create oversized holes that reduce holding power. Minimum of 1/2” deeper than the anchor’s embedment depth gives the dust somewhere to go.
Tools required: Hammer drill, Impact driver or standard drill, 5/16” Nut Driver. The torque reduction means a standard drill can handle these where other screws demand an impact driver.
Certifications and Compliance
ICC-ES ESR-712 (Code compliant for concrete), ICC-ES ESR-716 (Code compliant for masonry), International Building Code (IBC) & International Residential Code (IRC) compliant, Florida Product Approval (FL-16230), Miami-Dade County NOA (25-1002.03), City of Los Angeles (COLA) Research Report. Full code compliance for commercial and residential work.
Bottom Line
The Titen Turbo earns its place on the truck for contractors who mount electrical boxes, furring strips, and light fixtures to masonry daily. The torque reduction technology actually works — fewer snapped heads, less drill strain, faster installation. 75 pieces of 1/4” x 2-1/4” Hex Head Titen Turbo Screw Anchors per box keeps you stocked without warehouse-level quantities.
Worth noting: Simpson Strong-Tie (Note: Often confused with Hilti, but Titen Turbo is a Simpson brand). Simpson makes these, not Hilti. The product performs regardless of the brand confusion.
Simpson Strong-Tie Limited Warranty (1 year): Guaranteed to be free from defects in material or workmanship. Proper installation per manufacturer guidelines is required for performance warranty. Standard warranty coverage — nothing exceptional but nothing concerning either.
Frequently Asked Questions
What size drill bit do I need for the 1/4” Titen Turbo? 3/16 inch ANSI Masonry Bit. Fresh bits matter — worn bits create oversized holes that compromise holding strength.
Can these be used outdoors? No. Blue coating provides corrosion resistance for dry/interior environments only. Choose stainless steel anchors for exterior applications.
How deep should I drill the hole? Minimum of 1/2” deeper than the anchor’s embedment depth. With 1-inch minimum embedment, drill at least 1-1/2 inches deep.
What’s the difference between Titen Turbo and regular Tapcon screws? Titen Turbo includes a dust-clearing channel which makes it easier to drive manually or with less powerful tools compared to standard Tapcon screws. Less torque required means fewer broken bits and snapped heads.
Do these come with driver bits? Driver bits are typically NOT included in the hex-head box packs. You’ll need a 5/16” hex driver.
Ready to Get Started?
Our building materials specialists can help you find the right Hilti products for your project.
More from Hilti
Explore All Hilti Products
We carry Hilti across all 11 Montana and Idaho stores.
