Halo H7ICT 6" IC Recessed Light Housing

The Halo H7ICT delivers what electrical contractors need most — speed. Got Nail bar hangers with pre-installed nails, Pass-N-Thru tool-less bar hanger shortening, and Quick Connect push-in wire nuts cut installation time significantly on new construction projects. At 7 inches tall, this housing fits standard 2x8 joist construction common in Montana’s snow-load building requirements.

Installation Speed and IC Rating for Montana Builds

The H7ICT’s pre-installed components make the difference between profitable jobs and time sinks. Got Nail bar hangers come with nails already loaded — no fumbling with loose fasteners while balancing on a ladder. Pass-N-Thru lets crews shorten bar hangers without tools. Slide-N-Side wire traps secure connections quickly. Quick Connect push-in wire nuts come pre-installed.

The integral thermal protector prevents over-lamping automatically — critical protection when homeowners inevitably stuff 100W bulbs where they shouldn’t go. IC rating means direct contact with insulation, essential for Montana’s R-38 to R-49 attic insulation requirements.

Specification	Value
Housing Material	All-aluminum die-formed
Dimensions	7”H × 7.5”W × 10.5”L
Ceiling Opening	6-1/2 inch
Voltage	120V Line Voltage
Max Wattage	90W Incandescent/Halogen
Socket Type	E26 Standard Medium Base

The 7-inch height matters. Montana’s structural snow loads often require 2x8 or deeper joists. This housing fits without modification. Notched plaster lip at 90-degree intervals enables laser centering of trims — another time-saver when laying out large rooms.

Trim Compatibility and Professional Construction

Compatible with Halo’s RL, RA, SLD, LT, SMD, and ML series trims, one housing type covers multiple project needs. Stock fewer SKUs. Standard E26 socket accepts LED downlight modules and retrofits when customers want to upgrade later.

The housing handles damp locations standard and wet locations with select showerlight trims. Air-Tite capability comes through the H7ICAT version for energy-conscious builds requiring sealed ceiling planes.

All-aluminum die-formed construction beats the steel housings that rust in humid crawl spaces. Aluminum dissipates heat better too. UL Listed under E75440-1-80 covers the certification requirements.

The 1-year limited warranty covers defects in materials and workmanship — standard coverage for commercial-grade housings. Professional contractors rate these housings 4.7 out of 5 stars, praising easy installation and solid construction.

For Montana electrical contractors handling production housing or light commercial work, the H7ICT hits the right marks. Pre-installed components save labor. IC rating handles heavy insulation. Aluminum construction survives job site abuse. The 7-inch height accommodates snow-load framing. One housing type works with multiple trim options. That combination of speed, safety, and versatility makes these housings worth stocking.

Frequently Asked Questions

What’s the difference between the H7ICT and H7ICAT models? The H7ICAT is the Air-Tite version of the H7ICT. Use the Air-Tite version when building codes or energy programs require a sealed ceiling plane to prevent air infiltration.

Can this housing be used in existing ceiling retrofits? No. This is a new construction housing requiring open ceiling access. For remodel applications, use the H7RICAT version designed for retrofit installations.

What size hole do I cut for installation? The ceiling opening size is 6-1/2 inches. Mark and cut carefully — oversized holes create gaps around the trim.

Does the housing work with dimmer switches? The housing itself is non-dimmable. Dimming capability depends on the bulb or LED module you install. Use dimmable LED retrofits for dimming functionality.

What trims can I use with this housing? The housing accepts Halo 6-inch trims including RL, RA, SLD, LT, SMD, and ML series. For wet locations like showers, use compatible showerlight trims.