Command’s adhesive broom gripper delivers 4-pound holding capacity with damage-free removal, compatible with 0.8-1.0 inch diameter handles. The gripper uses 3M stretch-release technology that actually works — no holes, no residue, no damaged drywall when you move out.
For contractors managing tool storage in rental properties or temporary job sites, this solves a real problem. No drilling means no patching later. At approximately 9.07 grams, the gripper itself adds negligible weight, and reusable with Command Large Refill Strips means you can relocate it between jobs.
Weight Capacity and Compatibility Specs
The numbers that matter for tool storage decisions:
| Specification | Value |
|---|---|
| Weight Capacity | Up to 4 lbs (approx. 1.8 kg) per gripper |
| Handle Diameter Range | 0.8 inches to 1.0 inch (2 cm to 2.5 cm) |
| Gripper Dimensions | 3.357” x 3.115” x 1.859” |
| Model Numbers | 17007-ES / 17007 |
That 4-pound capacity handles most brooms, mops, and light-duty tools. The 0.8-1.0 inch diameter range fits standard commercial cleaning equipment handles. Gripper mechanism can be stiff initially — work the mechanism a few times before hanging your heaviest tool.
Amazon ratings average 4.7 out of 5 stars based on ~38,000+ ratings. That’s contractor-grade approval from people who actually use these things daily.
Surface Requirements and Installation Reality
Temperature range: 50°F to 105°F (10°C to 40°C) makes this an indoor-only solution for Montana. Forget unheated garages or exterior mounting — these adhesive strips need controlled temperatures to maintain their grip.
Surface compatibility breaks down clearly:
Where it works:
- Painted walls, finished wood, tile, glass, metal, laminate, painted cinder block
Where it fails:
- Wallpaper, rough/textured surfaces
- Splash zones (within 1 ft of a sink)
- Recently painted walls (wait 7 days for paint to cure)
Installation demands proper prep. Clean the surface with rubbing alcohol. Do not use household cleaners. That’s not a suggestion — household cleaners leave residue that kills adhesion. Wait 1 hour before hanging the broom to allow the adhesive to bond fully.
Adhesive may fail on textured walls or if surface is not cleaned properly. Those orange peel or knockdown textures common in rentals won’t hold. You need smooth, clean surfaces for the adhesive to grab.
Damage-Free Removal — The Real Value Proposition
The stretch-release technology sets Command apart from knockoff adhesive hooks. Hold the gripper gently in place. Slowly pull the adhesive tab straight down against the wall, stretching it at least 15 inches until the strip releases.
This matters for three groups:
- Contractors working in occupied homes who can’t drill into finished walls
- Maintenance crews in rental properties with strict modification policies
- Job site trailers where temporary tool organization beats permanent mounting
Perfect for rented accommodation where you may be worried about harming surfaces. Reusable with Command Large Refill Strips — move the gripper between job sites without buying new hardware.
Simply push broom handle in for easy storage and pull it out when ready to use. No clips, no straps, no fiddling with hangers. The rubber grip mechanism holds handles securely once you push past that initial stiffness.
For Montana contractors dealing with property management companies that charge for every screw hole, or working temporary sites where drilling means patching later, Command’s broom gripper delivers exactly what it promises — solid 4-pound capacity without permanent installation.
Frequently Asked Questions
Q: What size tool handles work with the Command Adhesive Broom Gripper?
The Command Broom Gripper fits handles from 0.8 inches to 1.0 inch in diameter (2 cm to 2.5 cm), which covers standard brooms, mops, and cleaning tools. The gripper won’t work with oversized or very thin handles outside this range.
Q: Can I use Command grippers in an unheated garage or shop?
No, Command adhesive strips only function between 50°F to 105°F (10°C to 40°C), making them indoor-only in Montana climates. The adhesive won’t hold in freezing temperatures or unheated spaces.
Q: How do I remove a Command Broom Gripper without damaging the wall?
Hold the gripper gently in place and slowly pull the adhesive tab straight down against the wall, stretching it at least 15 inches until the strip releases. This 3M stretch-release technology leaves no holes, marks, or sticky residue when removed properly.
Q: What’s the actual weight limit for the Command Broom Gripper?
Each Command Broom Gripper holds up to 4 pounds (approximately 1.8 kg), enough for standard brooms, mops, and lightweight tools. The gripper maintains this capacity when properly installed on recommended surfaces.
Q: What surfaces won’t work with Command adhesive products?
Command grippers fail on wallpaper, rough/textured surfaces, areas within 1 foot of sinks, and recently painted walls (less than 7 days old). The adhesive needs smooth, clean surfaces like painted drywall, finished wood, tile, glass, metal, laminate, or painted cinder block.
Q: Can I reuse a Command Broom Gripper after removing it?
Yes, the gripper itself is reusable — simply attach new Command Large Refill Strips to move it between locations. Each original pack includes a spare strip, and refill packs are available separately.
Ready to Get Started?
Our building materials specialists can help you find the right Command products for your project.
More from Command
Explore All Command Products
We carry Command across all 11 Montana and Idaho stores.
