ClosetMaid SuperSlide 12″ x 72″ Linen Shelf

The ClosetMaid SuperSlide shelf delivers what matters for Montana closet installations: 60 pounds of evenly distributed weight capacity, dual mounting system compatibility, and field-cutting flexibility. At 72 inches long and 12 inches deep, this steel shelf with TuffCoat vinyl coating works equally well in master closets, linen storage, and utility rooms. The ventilated wire design addresses Montana’s seasonal humidity swings while the ability to cut it on-site saves contractors from inventory headaches.

Load Capacity and Installation Requirements

60 pounds evenly distributed — that’s the number that matters. Support brackets every 3 feet recommended keeps the shelf from sagging under winter coat loads or stacked linens. The steel construction with TuffCoat vinyl coating provides the backbone, while the coating prevents rust in damp closets and resists the yellowing that plagues bare wire shelving after a few years.

The ventilated wire construction with standard spacing (approximately 1 inch) handles most closet items without issue. For smaller items that might tip through standard wire spacing, ClosetMaid offers a ‘Close Mesh’ variant with tighter 5/8” wire spacing.

Specification	Value
Weight Capacity	60 lbs evenly distributed
Dimensions	72” L x 12” D
Material	Steel with TuffCoat vinyl coating
Wire Spacing	Standard (approx 1 inch)
Support Spacing	Every 3 ft recommended
Shipping Weight	Approx 5.9 - 8 lbs

Dual Mounting System Flexibility

This shelf plays nice with both major ClosetMaid mounting systems. Works with both Fixed Mount and ShelfTrack hardware — contractors don’t need to stock two different shelf types for different installations. The Fixed Mount uses wall-mounted clips and supports for permanent installations, while ShelfTrack provides an adjustable bracket system for clients who rearrange their closets seasonally.

Hardware is typically included in ‘Kits’ but must be purchased separately for ‘Shelf Only’ (Model 4717). That’s critical for accurate bidding. The shelf-only SKU 4717 includes just 1 x 72” Wire Shelf, while kit SKU 5632 adds closet rod, wall clips, support brackets, and installation hardware.

Compatible with SuperSlide closet rod supports and 3/4” closet rods, plus accessories like corner rounder shelves, rod ends, and shelf liner for small items. When installed with the SuperSlide rod system, hangers slide without interruption — no more lifting hangers over support brackets.

Field Customization and Ventilation Benefits

Can be cut to fit specific spaces using a hacksaw or bolt cutters. That’s contractor gold. Stock one size, cut to fit on-site. No callbacks for wrong measurements. No wasted trips for exchanges. The ability to cut the shelving to custom lengths with basic tools means fitting those odd-width closets in log homes or between existing built-ins.

The ventilated design for airflow serves Montana’s climate cycles well. Spring moisture from snowmelt. Summer humidity. Fall dampness. Winter condensation from temperature swings. Solid shelves trap moisture against stored items — wire shelving lets it breathe. The TuffCoat vinyl coating resists chipping, rust, and yellowing, handling the moisture without deteriorating like powder coating or bare metal.

SCS Global Certified for a minimum of 91% recycled content and indoor air quality compliance — certifications that matter for health-conscious clients and green building projects.

Frequently Asked Questions

What tools are needed for installation? Drill, level, screwdriver, and hacksaw or bolt cutters for custom sizing. Standard contractor toolkit handles everything.

How much weight can these shelves actually hold? 60 lbs evenly distributed per shelf section when support brackets are installed every 3 feet. That handles stacked sweaters, folded linens, or storage boxes without sagging.

What’s included with the shelf-only model 4717? 1 x 72” Wire Shelf only. Hardware must be purchased separately for ‘Shelf Only’ models. Kit versions include mounting hardware.

Can these shelves work with different bracket systems? Yes. Compatible with both Fixed Mount wall clips and ShelfTrack adjustable bracket system. Choose based on whether the client wants adjustability or permanent installation.

What about warranty coverage? 30-Day Limited Warranty as standard, with 1-Year replacement for missing or damaged parts due to manufacturer defects. Warranty is voided if combined with third-party components.