NCP Industries makes eco-friendly precast concrete building materials with two standout innovations: mortarless stone veneer installation and carbon-capturing concrete technology. The family-owned engineering and manufacturing company specializes in durable, eco-friendly precast concrete building materials and outdoor living products, targeting professional contractors who want faster installations and measurable environmental benefits.
CaptureCrete Technology Changes the Math on Concrete’s Carbon Footprint
ADORN’s ECO2LUXE Premier Series absorbs 1.5 lbs of CO2 per square foot while avoiding 1.0 lb of CO2 per square foot in production — a total carbon impact of 2.5 lbs of CO2 captured or avoided per square foot. Every 21 square feet equals one mature tree in carbon impact; 1000 square feet equals 47 trees.
That’s concrete math contractors can take to LEED certification meetings. The CaptureCrete technology comes from a partnership with Carbon Limit, turning what’s typically the construction industry’s biggest carbon villain into an actual carbon sink. The technology works across their entire ADORN line, not just premium products.
For Montana contractors dealing with increasing pressure for sustainable building practices — especially in resort markets like Whitefish where environmental credentials matter — these numbers provide documentation that actually moves the needle on project carbon footprints.
Mortarless Installation Saves Labor on Every Panel
ADORN panels weigh approximately 55 lbs per panel with shipping weight around 52-55 lbs per box — but here’s the kicker: they’re 30% lighter than original panels. Each panel runs 23.5 inches length by 6 inches height by 1.75 inches thickness.
No mortar. No clips. No starter strips. The panelized ‘screw-on’ format allows mechanical fastening directly to wood, concrete, OSB, or masonry. That matters when you’re racing Montana’s short construction season or trying to close in a project before freeze-up.
The corner system shows the same thinking: interlocking two-piece corners that work for both inside and outside applications. The self-draining system allows moisture to escape — critical for freeze-thaw performance.
Technical Specifications Across the ADORN Line
| Product Series | Coverage/Box | Weight/Box | Panel Dimensions | Key Features |
|---|---|---|---|---|
| Granite Series (Northern Gray) | 3-4 sq ft | 52-55 lbs | 23.5” × 6” × 1.75” | Sharp straight lines, exceptional depth profile |
| Ledgestone Series (Colorado Gray) | 3-4 sq ft | 52-55 lbs | 23.5” × 6” × 1.75” | Mimics natural stone with clean, dry-stack look |
| ECO2LUXE Premier (Northern Gray) | 3 sq ft | 52-55 lbs | 23.5” × 6” × 1.75” | Carbon-capturing technology |
| Corner System | 3 vertical linear feet | 50 lbs | 6” × 5.5” × 9.5” × 1.75” | Universal inside/outside design |
| Sills | 6 lineal feet | 27.125-45 lbs | 2.5” × 23.5” × 3.5” | Tan, Brown, or Gray options |
The coverage variance (3 vs 4 square feet) comes down to retailer packaging — Menards sells 3 sq ft boxes while Lowe’s and ADORN’s site mention 4 sq ft boxes. Always verify coverage before ordering.
All products fall under NCP’s flagship ADORN Mortarless Stone Veneer line, with material consisting of high-strength concrete made from recycled materials.
Weather Performance Built for Northern Climates
The specs that matter for Montana:
- Class A Fire Rating — critical for WUI construction
- 50+ freeze-thaw cycles (per general industry standards for quality manufactured stone)
- Self-draining system in corner pieces prevents moisture entrapment
- Weather-resistant design resists wind, moisture, rot, insects, and impact
The products carry a 30-year limited warranty covering manufacturing defects. Testing shows the concrete compressive strength exceeds 2100 psi after 28 days cure, with moisture absorption below 18%.
The shear bond strength hits 280 psi average — well above the 50 psi minimum requirement. That matters when Montana’s freeze-thaw cycles try to pop veneer off the wall.
The Company Behind the Technology
NCP Industries operates as a family-owned engineering and manufacturing company with over 20 years of industry experience. They hold both ICC-ES Certification and ISO 9001:2015, backing up their quality claims with third-party verification.
Their product portfolio extends beyond stone veneer to include foundation systems, hardscapes, ceiling systems, under-deck systems, and outdoor living products. But ADORN represents their flagship innovation — combining mortarless installation systems with carbon-capture concrete technology through their CaptureCrete partnership with Carbon Limit.
The company emphasizes durability, affordability, and environmental responsibility, with recognition for green building practices through their ECO2LUXE series. They position themselves as a trusted partner in eco-friendly building solutions, focused on transforming the construction industry with sustainable practices.
Who Should Consider ADORN Products
Professional contractors working on projects where installation speed, LEED points, or both matter. The mortarless system shines on commercial projects with tight timelines. The carbon-capture numbers work for any project chasing environmental certifications.
Skip it for budget jobs where traditional adhered veneer works fine and nobody’s counting carbon. The premium pricing only makes sense when you’re saving labor or earning LEED points.
Applications span both interior and exterior use — from house facades and outdoor kitchens to interior fireplaces and accent walls. The lightweight panels particularly suit retrofit projects where adding minimal weight matters.
Frequently Asked Questions
Q: How much does ADORN actually reduce installation time compared to traditional mortared stone? A: The mortarless, mechanical fastening system eliminates mortar mixing, application, and curing time — panels screw directly to substrates. While specific time savings aren’t documented, eliminating the mortar process typically cuts installation time by 40-60% on similar panelized systems.
Q: Can ADORN panels handle Montana’s freeze-thaw cycles? A: Testing shows moisture absorption below 18% and the product is rated for 50+ freeze-thaw cycles. Corner pieces include a self-draining system that allows moisture to escape, preventing the trapped water that causes freeze damage. The 30-year warranty covers manufacturing defects.
Q: What’s the real coverage per box since different retailers list different numbers? A: Coverage varies by retailer packaging — Menards sells 3 sq ft boxes while Lowe’s and ADORN’s site mention 4 sq ft boxes. The panels themselves are identical at 23.5” × 6”, so the difference is purely how many panels come per box. Always verify with your specific supplier.
Q: Does the CaptureCrete technology affect the concrete’s durability? A: Compressive strength testing shows over 2100 psi after 28 days cure, with shear bond strength averaging 280 psi — well above the 50 psi minimum. The carbon-capture technology doesn’t compromise structural performance.
Q: What substrates can ADORN attach to without special preparation? A: ADORN fastens directly to wood, concrete, OSB, or masonry without clips or wires. Compatible substrates also include brick (with masonry screws), concrete block/CMU, stucco (with proper preparation), ICF (Insulated Concrete Forms), and foam board insulation.
Ready to Get Started?
Our siding specialists can help you find the right NCP Industries products for your project.
