Franklin makes utility pumps and stud finders that solve specific jobsite problems. Their IntelliPump checks for water automatically every 2.5 minutes, and their ProSensor stud finders use six sensors to show the full width of studs without calibration.
The IntelliPump: Set It and Forget It
The Franklin IntelliPump 1/4 HP utility pump cycles every 2.5 minutes to sense water presence, which means you don’t have to stand there watching it. It detects water at 3/4” depth and pumps down to 1/4” — that’s the difference between a wet floor and a dry floor in most situations.
At 1,790 GPH (30 GPM), it moves enough water to handle most basement flooding situations. The pump lifts water up to 22 feet, which covers most residential applications from basements to rooftops. At 8.25 pounds, you can carry it one-handed to wherever the water is.
| Specification | Value |
|---|---|
| Flow Rate | 1,790 GPH (30 GPM) |
| Max Head Lift | 22 ft |
| Weight | 8.25 lbs |
| Power | 115V AC, 15A circuit |
| Discharge | 1” NPT with 5/8” garden hose adapter |
| Water Detection | 3/4” depth |
| Pumps Down To | 1/4” depth |
The automatic operation makes this pump worth considering for Montana’s spring melt season. Set it in the low spot of your basement or crawl space, plug it in, and let it do its job. No float switch to stick or fail — the electronic sensor handles everything.
The ProSensor FST602: Six Sensors Beat One
The Franklin ProSensor FST602 uses 6 precision sensors instead of the typical one or two found in most stud finders. This multi-sensor array shows both the center and edges of studs simultaneously, which means you know exactly where to drive your screws when mounting cabinets or TVs.
No calibration required — just press and hold. It scans up to 1.5 inches deep, handling standard drywall and even some double-layer applications. The tool detects both wood and metal studs, so it works whether you’re in residential wood framing or commercial steel stud construction.
| Specification | Value |
|---|---|
| Sensors | 6 precision sensors |
| LED Indicators | 6 |
| Detection Depth | 1.5 inches |
| Dimensions | 3.5” W × 4.25” H × 2.125” D |
| Power | 2 × AAA batteries |
| Operating Temp | 32°F to 110°F |
Professional reviews praise its accuracy and ease of use. Some users note it’s primarily for stud detection without multifunctional features — no AC detection or metal scanning modes. That’s not a weakness if you need a tool that does one thing well. Battery life and long-term durability have been concerns in some reviews, so keep spare AAAs handy.
Worth Your Money?
Both Franklin tools solve real problems. The IntelliPump eliminates the need to babysit a pump during spring flooding. The ProSensor shows you exactly where studs are without the guess-and-check dance of single-sensor models.
For a tool that shows full stud width with six sensors, the ProSensor delivers real value. Skip the cheaper single-sensor models that make you sweep back and forth to find edges.
The IntelliPump makes sense for anyone dealing with seasonal water intrusion. Its automatic operation and ability to pump down to 1/4” depth set it apart from basic utility pumps that need manual monitoring.
FAQ
Q: Does the IntelliPump need a float switch?
No, the IntelliPump uses an integrated electronic sensor instead of a mechanical float switch. It cycles every 2.5 minutes to check for water and turns on automatically when needed.
Q: How many studs can the ProSensor detect at once?
With its 3.5-inch width and 6 sensors, the ProSensor FST602 can detect multiple studs if they’re close together. The full-width LED display shows both centers and edges simultaneously.
Q: What’s the smallest amount of water the IntelliPump can remove?
The pump continues running until water depth drops to 1/4 inch. It starts pumping when water reaches 3/4 inch depth.
Q: Does the ProSensor work on textured walls?
Some users report detection inconsistencies in complex wall structures. The tool works best on smooth drywall surfaces where all six sensors can maintain contact.
Q: Can the IntelliPump handle hot water?
No, the maximum water temperature is 77°F (25°C). This pump is designed for basement flooding and similar cold water applications, not for hot water heater failures.
Ready to Get Started?
Our tools specialists can help you find the right Franklin products for your project.
