Daly’s Wood Finishing Products specializes in high-quality wood finishing solutions and is committed to enhancing customer satisfaction and sharing its expertise in wood finishing. They’ve been at it for over 75 years in the Pacific Northwest, but forget the history lesson. What matters is they publish the numbers contractors need — VOC content, coverage rates, recoat times. That’s rare in this industry.
The ProFin and Benite Lines
ProFin Oil Finish delivers 550 g/L VOC content, 100-125 sq ft coverage per quart, and 4-8 hour recoat times. Those aren’t marketing claims — they’re planning data. The 107°F flash point means you can work with it in normal shop conditions without special ventilation beyond standard practice. At 0.87 specific gravity, it’s lighter than water-based poly but heavier than typical penetrating oils.
The real value shows in the application window. That 4-8 hour recoat time lets you apply multiple coats in a single day — critical when you’re trying to finish a job before Montana’s weather turns. Compare that to 24-hour recoat products that stretch simple jobs across multiple site visits.
| ProFin Specifications | Value |
|---|---|
| VOC Content | 550 g/L |
| Coverage | 100-125 sq ft/quart |
| Recoat Time | 4-8 hours |
| Flash Point | 107°F |
| Specific Gravity | 0.87 |
| Recommended Coats | 2-3 |
Benite Wood Conditioner covers 150-200 sq ft per gallon on rough surfaces and 400-500 sq ft on smooth wood. That’s a massive spread, but it’s honest. Rough-sawn cedar siding drinks this stuff. Planed pine doors barely sip it. At 30% solids by volume, it’s delivering actual material into the wood, not just carrier solvents that evaporate.
The formula works because it integrates into wood cell structure and hardens wood fiber. No surface film means it won’t crack, chalk, blister, or peel like film-forming finishes. For Montana’s freeze-thaw cycles and UV exposure, that matters. Film finishes look great for two seasons, then start failing at the edges.
Marine-Grade Performance
SeaFin Teak Oil delivers the same 550 g/L VOC formulation but adds water-repellent and wear-resistant non-slip surface properties. It resists chipping, cracking, blistering, and peeling — the four horsemen of finish failure in harsh conditions.
Coverage runs 50 to 100 sq ft per quart, half what ProFin delivers. That’s not a flaw — it’s honest labeling for a product designed to saturate deeply. The 12-hour recoat time means overnight drying between coats, but full cure takes 4 weeks. Plan accordingly.
| SeaFin Specifications | Value |
|---|---|
| VOC Content | 550 g/L |
| Coverage | 50-100 sq ft/quart |
| Recoat Time | 12 hours |
| Full Cure | 4 weeks |
| Surface Type | Water-repellent, non-slip |
Who Actually Needs This
ProFin works for cabinet shops that need predictable recoat times and low odor formulas for occupied spaces. The wipe-on, wipe-off application means no spray booth required — perfect for site-finished millwork.
Benite shines on soft or porous woods like pine, fir, and cedar — Montana’s construction staples. Use it as a pre-stain sealer to prevent blotching, or run it solo as a natural finish that won’t build up and peel.
Skip these products if you’re coating composite decking or vinyl-clad anything. They’re formulated for real wood. Also skip them if you need same-day completion — even the fastest recoat times require patience.
Daly’s manufactures a full line including Conditioners, Sealers & Finishes, Stains, Floor Finishes & Deck Care, Marine Finishes (SeaFin), and Cleaners, Bleaches & Miscellaneous. They employ a dedicated chemist who maintains and updates product formulations, which explains why the technical data sheets actually match field performance.
The company runs as a division of Farwest Paint Mfg. Co. That’s manufacturing infrastructure, not just a label slapped on imported products. Local manufacturing in the Pacific Northwest means consistent quality control and formulations designed for this climate.
FAQ
What’s the actual working time with ProFin before it gets tacky?
The specifications don’t spell out open time, but with 4-8 hour recoat window and wipe-on, wipe-off application, you’re looking at 15-20 minutes working time in normal conditions. Cold shops extend it, hot shops shrink it.
Does Benite change wood color?
Practically odorless and colorless according to specs. It’ll darken wood slightly like any penetrating oil, but won’t add amber tones like traditional oil finishes.
Can SeaFin be used on interior projects?
It’s designed for interior and external wood treatment, and you can use it as door finish, rail finish, and furniture finish. The non-slip surface property makes it interesting for stair treads and high-traffic floors.
What’s the shelf life on these products?
The specifications don’t include shelf life data. Standard for oil-based finishes runs 3-5 years unopened, 1-2 years opened if you keep air out.
Do these meet Montana VOC regulations?
At 550 g/L VOC content, these products fall under the 550 g/L limit for clear wood finishes in most jurisdictions. Always verify current local limits.
Ready to Get Started?
Our paint & finish specialists can help you find the right Daly's products for your project.
