Briggs & Stratton makes small engine parts that keep outdoor power equipment running. Their maintenance parts include primer bulbs, air filters, fuel filters, and carburetor rebuild kits — the components contractors need when engines won’t start or run rough.
They’re the world’s largest producer of engines for outdoor power equipment, but what matters in a building supply context is their replacement parts. When your pressure washer won’t start on a jobsite or your generator quits during a power outage, you need these parts.
Critical Maintenance Components
The 40-micron fuel filter (691035) filters out particles that would otherwise clog carburetors and fuel injectors. Compatible with 1/4 inch fuel lines and designed for fuel pump systems from 12-35hp, it’s the right filtration level for small engines — fine enough to catch debris but not so fine it restricts flow. The clear housing lets you see when it’s time to replace, which beats guessing why an engine won’t run.
Air filters keep dust and debris out of the combustion chamber. The 30-029 measures 4” x 2.5” x 2.25” and fits 5HP Quantum engines (12U800-12W800 series). The 30-048 is larger at 7-1/4” x 2-7/8” x 2-3/8” for 19-28 CID vertical engines. Both use pleated paper media that traps particles without choking airflow.
| Part Number | Dimensions | Engine Compatibility |
|---|---|---|
| 30-029 | 4” x 2.5” x 2.25” | 5HP Quantum (12U800-12W800) |
| 30-048 | 7-1/4” x 2-7/8” x 2-3/8” | 19-28 CID vertical engines |
Carburetor rebuild kits restore fuel efficiency by 5-10% — significant when you’re burning through tanks of gas daily. Kits include high-temperature resistant gaskets, brass or hardened steel needles and seats, stainless steel springs, and all the O-rings and seals needed. Compatible with engine series 110000, 120000, and 12 cu. in. Intek OHV.
Cold Weather Starting Solutions
Montana mornings demand reliable primer bulbs. The 49-058 measures 0.75” x 0.75” x 0.75” and fits Quantum 3.5-6HP and Sprint 3.5-4HP engines. Made from flexible polymer/rubber that stays pliable in cold weather. Works with Pulsa-Prime carburetors — the type found on most walk-behind mowers and pressure washers.
Primer bulbs facilitate easier starting by allowing manual priming of the carburetor. Without them, you’re pulling that starter cord until your arm falls off. They wear out from fuel exposure and weather, so keeping spares makes sense.
Frequently Asked Questions
What micron rating works best for small engine fuel filters?
40 microns works for fuel pump systems from 12-35hp. This rating catches debris without restricting fuel flow. Finer filtration isn’t always better — too fine and you’ll starve the engine.
How can someone determine which air filter fits a Briggs engine?
Check your engine series number. 5HP Quantum engines (12U800-12W800 series) use the 30-029 filter measuring 4” x 2.5” x 2.25”. 19-28 CID vertical engines take the larger 30-048 at 7-1/4” x 2-7/8” x 2-3/8”.
Are carburetor rebuild kits worth it compared to buying a new carburetor?
Rebuild kits improve fuel efficiency by 5-10% and cost a fraction of a new carburetor. With high-temperature gaskets, brass needles, and stainless springs, a proper rebuild often outlasts aftermarket replacement carburetors.
Why do primer bulbs crack and need replacement?
Primer bulbs deteriorate from exposure to fuel, weather, and frequent use. Ethanol in modern fuel accelerates the breakdown. Cold weather makes cheap bulbs brittle. Quality polymer/rubber construction lasts longer but still needs periodic replacement.
Ready to Get Started?
Our tools specialists can help you find the right Briggs & Stratton products for your project.
